Hi,
I tried increasing the buffersize on a knoppmyth box, kernel 2.6.18-chw-13
V4l-dvb freshly checked out from the repository
firmware dvb-usb-dib0700-01.fw
The change made the problem worse for me to.
Less than an hour, compared to about once a day before.
/Nils
Jonas Larsson wrote:
Patrick Boettcher wrote:
Hi Antti,
beside the XactErr which is not OK, there is maybe the chance to fix the
disconnect issue:
Can you please try to increase the URB buffer size by 1KB?
in the define DIB0700_DEFAULT_STREAMING_CONFIG
you change .buffersize = 39480, to 40504.
I've been following this thread, hoping to see a solution to the
Nova-T disconnect issue being found. I did some tests with this
new buffersize.
I've changed the buffersize (2.6.20.1) as above and tried it with
the 3 available firmwares. In all cases did this make the problem
much worse! I used to have one disconnect each 24-30 hours, now it took
less than 1 hour. Event though this is bad it's a clue to what is
really going wrong. Did anyone analyse what sizes the windows driver
uses? Or does it also suffer from disconnects? Any other sizes that
may be interesting?
I can do more tests on my system if you need help. Just ask me...
/ Jonas
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
begin:vcard
fn:Nils Segerdahl
n:Segerdahl;Nils
org:UPSYS AB
adr:;;;Uppsala;;;Sweden
email;internet:seger@xxxxxxxx
title:Senior Consultant
tel;work:+46(0)18568041
tel;fax:+46(0)18568049
tel;cell:+46(0)703556503
url:http://www.upsys.se
version:2.1
end:vcard
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
