Patrick Boettcher <patrick.boettcher@xxxxxxx> writes: > Attached you'll find the latest firwmare for the dib0700. It should reduce > the XactErr and maybe behave better all the way. Can you please check it? Sure. With this firmware the transaction errors seem to be pouring in: [17179743.308000] ehci_hcd 0000:03:0c.2: XactErr, ep3in, token=0000cd08 [17179788.832000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17179789.944000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17179835.012000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17179880.228000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17179881.348000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=8000cd08 [17179927.540000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17179972.608000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17179973.716000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180065.016000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=80000e08 [17180066.128000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180110.196000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180111.304000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=80004d08 [17180156.372000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180157.476000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=80004d08 [17180203.700000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180248.816000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180249.924000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180295.004000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180296.116000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=80004d08 [17180341.336000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180386.404000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180387.512000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180433.692000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=8000cd08 [17180478.800000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180524.980000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00008d08 [17180526.092000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=00004d08 [17180570.160000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=00000c08 [17180571.268000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=80004d08 [17180617.448000] ehci_hcd 0000:03:0c.2: XactErr, ep2in, token=80004d08 [17180662.572000] ehci_hcd 0000:03:0c.2: XactErr, ep3in, token=8038c948 [17180662.572000] ehci_hcd 0000:03:0c.2: XactErr, ep0out, token=80008148 [17180662.572000] ehci_hcd 0000:03:0c.2: devpath 1 ep0out 3strikes,t=80008148 Hard failure in less than 20 minutes from boot :-) I did not power cycle the machine, but I did override the cold/warm check in the dvb-usb module and log shows that the new fw got loaded. But I'll also check after power cycling the machine when I get home. -- http://www.iki.fi/~ananaza/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
