Re: PCTV400e - dvb-usb: bulk message failed / ttusb2: i2c transfer failed / PPC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

I found the problem: HIGHMEM-Support.
If I turn it off - now everything works fine since a few weeks here!

Best Regards and many thanks for your efforts!
darav

Am 12.01.2007 um 12:05 schrieb Patrick Boettcher:

Hi darav,

Unfortunately my time is very limited and I have no access to a PPC.

Clearly it is a problem regarding big-endian and little-endian but where?

The error messages like that

[  490.385502] dvb-usb: bulk message failed: -22 (8/164598)

Are looking very strange, the number 164598 in this case is obviously
wrong.

Please try to check the source for typical little/big-endian things.

Patrick.


On Thu, 11 Jan 2007, darav@xxxxxx wrote:

Hello Mailinglist,
Dear Mr. Boettcher,

this is my second try - because the first one did contain log files from an
"non-debug" kernel.
So please ignore the first one.

So once again: thank you very much for the development of the pctv400e driver!

When running dvbscan -c (or vdr) I'm getting this in from the kernel:

[  490.383623] ehci_hcd 0001:10:1b.2: fatal error
[  490.385173] ehci_hcd 0001:10:1b.2: HC died; cleaning up
[  490.385191] usb 1-2: USB disconnect, address 6
...
[  490.385502] dvb-usb: bulk message failed: -22 (8/164598)
[ 490.385507] ttusb2: there might have been an error during control message
transfer. (rlen = 3, was 0)
[  490.385512] ttusb2: i2c transfer failed.
[  490.385522] dvb-usb: bulk message failed: -22 (8/-1070298288)
[ 490.385526] ttusb2: there might have been an error during control message
transfer. (rlen = 4, was 0)
[  490.385531] ttusb2: i2c transfer failed.
[  490.385536] dvb-usb: bulk message failed: -22 (9/18)
[ 490.385540] ttusb2: there might have been an error during control message
transfer. (rlen = 3, was 0)
[  490.385544] ttusb2: i2c transfer failed.

My System is an Mac Mini PPC,
Kernel 2.6.18-rc4 with V4L-DVB mercurial tree from 2007-01-09.

Btw.:
- The same happens with 2.6.20-rc3 on ppc.
- I tested with my x86-system and everything works fine there, so it might be
an endian problem.
- All other USB-devices are working fine (Cinergy T2, dvb_ttusb_budget,
external hdd).

It would be great if you can help me to get the device working.
Of course I'm willing to send you more information, to help testing or
debugging. Please let me just know what you need.

Attached please find the full dmesg output.

Bye & Thank you!
darav


dmesg:

[  460.399892] usb 1-2: USB disconnect, address 4
[  460.399967] kobject_uevent
[  460.399975] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0'
[  460.400010] kobject 1-2:1.0: cleaning up
[  460.400030] kobject_uevent
[  460.400034] fill_kobj_path: path = '/class/usb_device/usbdev1.4'
[  460.400039] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  460.400056] kobject usbdev1.4: cleaning up
[  460.400094] kobject_uevent
[  460.400098] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/usbdev1.4_ep00'
[  460.400112] kobject usbdev1.4_ep00: cleaning up
[  460.400190] kobject_uevent
[  460.400194] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  460.400208] kobject 1-2: cleaning up
[ 467.605699] usb 1-2: new high speed USB device using ehci_hcd and address 5
[  467.720093] kobject 1-2: registering. parent: usb1, set: devices
[  467.720150] kobject_uevent
[  467.720157] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 467.720207] kobject usbdev1.5_ep00: registering. parent: 1-2, set: devices
[  467.720235] kobject_uevent
[  467.720239] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/usbdev1.5_ep00'
[  467.720260] usb 1-2: configuration #1 chosen from 1 choice
[ 467.720333] kobject 1-2:1.0: registering. parent: 1-2, set: devices
[  467.720352] kobject_uevent
[  467.720356] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0'
[ 467.720395] kobject usbdev1.5: registering. parent: usb_device, set:
class_obj
[  467.720414] kobject_uevent
[  467.720418] fill_kobj_path: path = '/class/usb_device/usbdev1.5'
[  467.720424] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 467.856703] kobject dvb_pll: registering. parent: <NULL>, set: module
[  467.858959] kobject_uevent
[  467.860803] fill_kobj_path: path = '/module/dvb_pll'
[ 467.866537] kobject firmware_class: registering. parent: <NULL>, set:
module
[  467.868898] kobject_uevent
[  467.870743] fill_kobj_path: path = '/module/firmware_class'
[  467.874369] subsystem firmware: registering
[ 467.874378] kobject firmware: registering. parent: <NULL>, set: class [ 467.885821] kobject dvb_core: registering. parent: <NULL>, set: module
[  467.888103] kobject_uevent
[  467.889807] fill_kobj_path: path = '/module/dvb_core'
[  467.892620] subsystem dvb: registering
[  467.892628] kobject dvb: registering. parent: <NULL>, set: class
[ 467.899528] kobject dvb_usb: registering. parent: <NULL>, set: module
[  467.901687] kobject_uevent
[  467.903478] fill_kobj_path: path = '/module/dvb_usb'
[ 467.907169] kobject dvb_usb_ttusb2: registering. parent: <NULL>, set:
module
[  467.909454] kobject_uevent
[  467.911294] fill_kobj_path: path = '/module/dvb_usb_ttusb2'
[ 467.914151] kobject dvb_usb_ttusb2: registering. parent: <NULL>, set:
drivers
[  467.916276] kobject_uevent
[ 467.918108] fill_kobj_path: path = '/bus/usb/drivers/ dvb_usb_ttusb2' [ 467.920719] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in cold state,
will try to load a firmware
[ 467.923002] kobject 1-2: registering. parent: firmware, set: class_obj
[  467.925072] kobject_uevent
[  467.926879] fill_kobj_path: path = '/class/firmware/1-2'
[  467.928669] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  467.928680] kobject_uevent - uevent() returned -19
[  467.932622] kobject_uevent
[  467.934500] fill_kobj_path: path = '/class/firmware/1-2'
[  467.936479] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  468.014317] kobject_uevent
[  468.016339] fill_kobj_path: path = '/class/firmware/1-2'
[  468.018344] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  468.020881] dvb-usb: downloading firmware from file
'dvb-usb-pctv-400e-01.fw'
[  468.023100] kobject 1-2: cleaning up
[  468.084780] usbcore: registered new driver dvb_usb_ttusb2
[  468.149720] usb 1-2: USB disconnect, address 5
[ 468.149772] dvb-usb: generic DVB-USB module successfully deinitialized and
disconnected.
[  468.149791] kobject_uevent
[  468.149799] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0'
[  468.149835] kobject 1-2:1.0: cleaning up
[  468.149849] kobject_uevent
[  468.149854] fill_kobj_path: path = '/class/usb_device/usbdev1.5'
[  468.149859] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  468.149876] kobject usbdev1.5: cleaning up
[  468.149916] kobject_uevent
[  468.149920] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/usbdev1.5_ep00'
[  468.149934] kobject usbdev1.5_ep00: cleaning up
[  468.150012] kobject_uevent
[  468.150016] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  468.150029] kobject 1-2: cleaning up
[ 469.855636] usb 1-2: new high speed USB device using ehci_hcd and address 6
[  469.970732] kobject 1-2: registering. parent: usb1, set: devices
[  469.970785] kobject_uevent
[  469.970791] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 469.970842] kobject usbdev1.6_ep00: registering. parent: 1-2, set: devices
[  469.970871] kobject_uevent
[  469.970875] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/usbdev1.6_ep00'
[  469.970897] usb 1-2: configuration #1 chosen from 1 choice
[ 469.970984] kobject 1-2:1.0: registering. parent: 1-2, set: devices
[  469.971003] kobject_uevent
[  469.971007] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0'
[ 469.971037] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state. [ 469.973342] kobject i2c-9: registering. parent: platform, set: devices
[  469.973365] kobject_uevent
[ 469.973372] kobject i2c-9: registering. parent: i2c-adapter, set: class_obj
[  469.973390] kobject_uevent
[  469.973394] fill_kobj_path: path = '/class/i2c-adapter/i2c-9'
[  469.973399] fill_kobj_path: path = '/devices/platform/i2c-9'
[ 469.973416] kobject i2c-9: registering. parent: i2c-dev, set: class_obj
[  469.973432] kobject_uevent
[  469.973436] fill_kobj_path: path = '/class/i2c-dev/i2c-9'
[  469.973440] fill_kobj_path: path = '/devices/platform/i2c-9'
[ 469.973453] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 469.973806] DVB: registering new adapter (Pinnacle 400e DVB-S USB2.0). [ 469.974188] kobject dvb0.demux0: registering. parent: dvb, set: class_obj
[  469.974212] kobject_uevent
[  469.974220] fill_kobj_path: path = '/class/dvb/dvb0.demux0'
[  469.974226] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 469.974245] kobject dvb0.dvr0: registering. parent: dvb, set: class_obj
[  469.974256] kobject_uevent
[  469.974259] fill_kobj_path: path = '/class/dvb/dvb0.dvr0'
[  469.974263] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 469.974276] kobject dvb0.net0: registering. parent: dvb, set: class_obj
[  469.974287] kobject_uevent
[  469.974290] fill_kobj_path: path = '/class/dvb/dvb0.net0'
[  469.974294] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 470.055492] kobject tda10086: registering. parent: <NULL>, set: module
[  470.057767] kobject_uevent
[  470.059604] fill_kobj_path: path = '/module/tda10086'
[ 470.063352] DVB: registering frontend 0 (Philips TDA10086 DVB- S)...
[  470.063372] kobject dvb0.frontend0: registering. parent: dvb, set:
class_obj
[  470.063401] kobject_uevent
[  470.063406] fill_kobj_path: path = '/class/dvb/dvb0.frontend0'
[  470.063413] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[ 470.085913] kobject tda826x: registering. parent: <NULL>, set: module
[  470.088175] kobject_uevent
[  470.090012] fill_kobj_path: path = '/module/tda826x'
[ 470.162587] kobject lnbp21: registering. parent: <NULL>, set: module
[  470.164903] kobject_uevent
[  470.166750] fill_kobj_path: path = '/module/lnbp21'
[ 470.170654] dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully initialized
and connected.
[ 470.170694] kobject usbdev1.6_ep01: registering. parent: 1-2:1.0, set:
devices
[  470.170741] kobject_uevent
[  470.170757] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep01'
[ 470.170789] kobject usbdev1.6_ep81: registering. parent: 1-2:1.0, set:
devices
[  470.170806] kobject_uevent
[  470.170810] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep81'
[ 470.170833] kobject usbdev1.6_ep82: registering. parent: 1-2:1.0, set:
devices
[  470.170850] kobject_uevent
[  470.170854] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep82'
[ 470.170886] kobject usbdev1.6: registering. parent: usb_device, set:
class_obj
[  470.170913] kobject_uevent
[  470.170920] fill_kobj_path: path = '/class/usb_device/usbdev1.6'
[  470.170926] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'

#dvbscan -c

[  490.383623] ehci_hcd 0001:10:1b.2: fatal error
[  490.385173] ehci_hcd 0001:10:1b.2: HC died; cleaning up
[  490.385191] usb 1-2: USB disconnect, address 6
[  490.385270] kobject_uevent
[  490.385278] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep01'
[  490.385312] kobject usbdev1.6_ep01: cleaning up
[  490.385340] kobject_uevent
[  490.385343] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep81'
[  490.385356] kobject usbdev1.6_ep81: cleaning up
[  490.385381] kobject_uevent
[  490.385385] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0/usbdev1.6_ep82'
[  490.385398] kobject usbdev1.6_ep82: cleaning up
[  490.385462] kobject_uevent
[  490.385466] fill_kobj_path: path = '/class/dvb/dvb0.frontend0'
[  490.385472] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.385489] kobject dvb0.frontend0: cleaning up
[  490.385502] dvb-usb: bulk message failed: -22 (8/164598)
[ 490.385507] ttusb2: there might have been an error during control message
transfer. (rlen = 3, was 0)
[  490.385512] ttusb2: i2c transfer failed.
[  490.385522] dvb-usb: bulk message failed: -22 (8/-1070298288)
[ 490.385526] ttusb2: there might have been an error during control message
transfer. (rlen = 4, was 0)
[  490.385531] ttusb2: i2c transfer failed.
[  490.385536] dvb-usb: bulk message failed: -22 (9/18)
[ 490.385540] ttusb2: there might have been an error during control message
transfer. (rlen = 3, was 0)
[  490.385544] ttusb2: i2c transfer failed.
[  490.385561] kobject_uevent
[  490.385564] fill_kobj_path: path = '/class/dvb/dvb0.net0'
[  490.385569] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.385584] kobject dvb0.net0: cleaning up
[  490.385599] kobject_uevent
[  490.385602] fill_kobj_path: path = '/class/dvb/dvb0.demux0'
[  490.385607] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.385621] kobject dvb0.demux0: cleaning up
[  490.385634] kobject_uevent
[  490.385637] fill_kobj_path: path = '/class/dvb/dvb0.dvr0'
[  490.385642] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.385655] kobject dvb0.dvr0: cleaning up
[  490.385854] kobject_uevent
[  490.385860] fill_kobj_path: path = '/class/i2c-dev/i2c-9'
[  490.385865] fill_kobj_path: path = '/devices/platform/i2c-9'
[  490.385881] kobject i2c-9: cleaning up
[  490.385896] kobject_uevent
[  490.385900] fill_kobj_path: path = '/class/i2c-adapter/i2c-9'
[  490.385904] fill_kobj_path: path = '/devices/platform/i2c-9'
[  490.385917] kobject i2c-9: cleaning up
[  490.385930] kobject_uevent
[  490.385937] kobject i2c-9: cleaning up
[ 490.385946] dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully deinitialized
and disconnected.
[  490.385960] kobject_uevent
[  490.385964] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2:1.0'
[  490.385987] kobject 1-2:1.0: cleaning up
[  490.386010] kobject_uevent
[  490.386013] fill_kobj_path: path = '/class/usb_device/usbdev1.6'
[  490.386018] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.386032] kobject usbdev1.6: cleaning up
[  490.386066] kobject_uevent
[  490.386070] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2/usbdev1.6_ep00'
[  490.386083] kobject usbdev1.6_ep00: cleaning up
[  490.386180] kobject_uevent
[  490.386184] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.2/usb1/1-2'
[  490.386199] kobject 1-2: cleaning up
[  490.386760] ohci_hcd 0001:10:1b.1: wakeup
[ 490.710169] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 490.887888] usb 4-1: not running at top speed; connect to a high speed hub
[  490.902839] kobject 4-1: registering. parent: usb4, set: devices
[  490.902891] kobject_uevent
[  490.902897] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1'
[ 490.902950] kobject usbdev4.2_ep00: registering. parent: 4-1, set: devices
[  490.902978] kobject_uevent
[  490.902982] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1/usbdev4.2_ep00'
[  490.903004] usb 4-1: configuration #1 chosen from 1 choice
[ 490.907044] kobject 4-1:1.0: registering. parent: 4-1, set: devices
[  490.907074] kobject_uevent
[  490.907078] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0'
[ 490.907111] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state. [ 490.914879] kobject i2c-9: registering. parent: platform, set: devices
[  490.914899] kobject_uevent
[ 490.914906] kobject i2c-9: registering. parent: i2c-adapter, set: class_obj
[  490.914924] kobject_uevent
[  490.914928] fill_kobj_path: path = '/class/i2c-adapter/i2c-9'
[  490.914933] fill_kobj_path: path = '/devices/platform/i2c-9'
[ 490.914948] kobject i2c-9: registering. parent: i2c-dev, set: class_obj
[  490.914965] kobject_uevent
[  490.914968] fill_kobj_path: path = '/class/i2c-dev/i2c-9'
[  490.914972] fill_kobj_path: path = '/devices/platform/i2c-9'
[ 490.914985] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it
lacks a hardware PID filter)
[  490.915000] kobject_uevent
[  490.915004] fill_kobj_path: path = '/class/i2c-dev/i2c-9'
[  490.915008] fill_kobj_path: path = '/devices/platform/i2c-9'
[  490.915027] kobject i2c-9: cleaning up
[  490.915033] kobject_uevent
[  490.915036] fill_kobj_path: path = '/class/i2c-adapter/i2c-9'
[  490.915041] fill_kobj_path: path = '/devices/platform/i2c-9'
[  490.915051] kobject i2c-9: cleaning up
[  490.915062] kobject_uevent
[  490.915068] kobject i2c-9: cleaning up
[ 490.915075] dvb-usb: Pinnacle 400e DVB-S USB2.0 error while loading driver
(-19)
[ 490.915091] kobject usbdev4.2_ep01: registering. parent: 4-1:1.0, set:
devices
[  490.915111] kobject_uevent
[  490.915115] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/usbdev4.2_ep01'
[ 490.915143] kobject usbdev4.2_ep81: registering. parent: 4-1:1.0, set:
devices
[  490.915162] kobject_uevent
[  490.915166] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/usbdev4.2_ep81'
[ 490.915186] kobject usbdev4.2_ep82: registering. parent: 4-1:1.0, set:
devices
[  490.915210] kobject_uevent
[  490.915214] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/usbdev4.2_ep82'
[ 490.915237] kobject usbdev4.2: registering. parent: usb_device, set:
class_obj
[  490.915256] kobject_uevent
[  490.915259] fill_kobj_path: path = '/class/usb_device/usbdev4.2'
[  490.915264] fill_kobj_path: path =
'/devices/pci0001:10/0001:10:1b.1/usb4/4-1'
[ 491.347135] Unable to handle kernel paging request for data at address
0xf248c11c
[  491.347146] Faulting instruction address: 0xf235a19c
[  491.347152] Oops: Kernel access of bad area, sig: 11 [#1]
[  491.348909]
[ 491.350420] Modules linked in: lnbp21 tda826x tda10086 dvb_usb_ttusb2 dvb_usb dvb_core firmware_class dvb_pll nfsd exportfs lockd sunrpc appletalk
psnap llc af_packet hci_usb unix
[  491.354520] NIP: F235A19C LR: C0089D04 CTR: F235A15C
[ 491.356234] REGS: eae17ad0 TRAP: 0300 Not tainted (2.6.18- rc4-debug) [ 491.358041] MSR: 00009032 <EE,ME,IR,DR> CR: 84000428 XER: 00000000
[  491.359787] DAR: F248C11C, DSISR: 40000000
[  491.361449] TASK = efa4f870[10564] 'dvbscan' THREAD: eae16000
[ 491.361789] GPR00: C0089D04 EAE17B80 EFA4F870 EEE51AC0 F248C138 00000000
0A512AE0 00000000
[ 491.363845] GPR08: 00000000 00000000 00000000 00000014 00000000 100219F4
7FCAE6EC 10000000
[ 491.365906] GPR16: 00000000 100FB460 10020000 10020000 100C0000 EAE17B9C
EAE17B9C 10019CB0
[ 491.367970] GPR24: EAE17BB4 00000000 00000000 EAE17F28 EEE51AC0 EAE17BA4
F248C0D4 FFFFFFEA
[  491.371465] NIP [F235A19C] dvb_demux_poll+0x40/0x94 [dvb_core]
[  491.373151] LR [C0089D04] do_sys_poll+0x1e8/0x434
[  491.374871] Call Trace:
[  491.376440] [EAE17B80] [EAE17BB4] 0xeae17bb4 (unreliable)
[  491.378225] [EAE17B90] [C0089D04] do_sys_poll+0x1e8/0x434
[  491.380004] [EAE17F20] [C0089FA0] sys_poll+0x50/0x60
[  491.381750] [EAE17F40] [C0010378] ret_from_syscall+0x0/0x38
[  491.383534] --- Exception: c01 at 0xff3903c
[  491.385125]     LR = 0xffbed70
[  491.386682] Instruction dump:
[ 491.388288] bfc10008 3be0ffea 90010014 83c30080 2f9e0000 419e0058 7c852378
389e0064
[ 491.390295] 419a0010 81290000 7d2903a6 4e800421 <813e0048> 387e0050
3be00000 3929fffd
[ 491.392317] <1>Unable to handle kernel paging request for data at address
0x40342f09
[  491.403097] Faulting instruction address: 0xf235eda4
[  491.403102] Oops: Kernel access of bad area, sig: 11 [#2]
[  491.403104]
[ 491.403106] Modules linked in: lnbp21 tda826x tda10086 dvb_usb_ttusb2 dvb_usb dvb_core firmware_class dvb_pll nfsd exportfs lockd sunrpc appletalk
psnap llc af_packet hci_usb unix
[  491.403118] NIP: F235EDA4 LR: C0074468 CTR: F235ED68
[ 491.403122] REGS: eae17930 TRAP: 0300 Not tainted (2.6.18- rc4-debug) [ 491.403125] MSR: 00009032 <EE,ME,IR,DR> CR: 22000422 XER: 00000000
[  491.403132] DAR: 40342F09, DSISR: 40000000
[  491.403135] TASK = efa4f870[10564] 'dvbscan' THREAD: eae16000
[ 491.403138] GPR00: 00000000 EAE179E0 EFA4F870 F23663F0 F2364FA0 00000000
00000000 00000000
[ 491.403145] GPR08: EC6F9E6C EC477AA0 FFFFFFFF 00000000 0FE2EDD0 100219F4
7FCAE6EC 10000000
[ 491.403152] GPR16: 00000000 100FB460 10020000 10020000 100C0000 EAE17B9C
EAE17B9C 10019CB0
[ 491.403159] GPR24: EAE17BB4 00000000 EC475834 EFFEADA0 EADCA0C8 EADCA0C8
C0E4F4A0 40342D31
[ 491.403167] NIP [F235EDA4] dvb_frontend_release+0x3c/0x9c [dvb_core]
[  491.403187] LR [C0074468] __fput+0xd8/0x1bc
[  491.403195] Call Trace:
[  491.403197] [EAE17A00] [C0074468] __fput+0xd8/0x1bc
[  491.403202] [EAE17A20] [C0070EF4] filp_close+0x80/0x98
[  491.403213] [EAE17A40] [C0028C48] put_files_struct+0x8c/0xf4
[  491.403226] [EAE17A60] [C002A260] do_exit+0x1c8/0x7f0
[  491.403232] [EAE17A90] [C000EB60] kernel_bad_stack+0x0/0x4c
[  491.403238] [EAE17AB0] [C0013548] bad_page_fault+0xc4/0xd8
[  491.403244] [EAE17AC0] [C0010814] handle_page_fault+0x7c/0x80
[ 491.403249] --- Exception: 300 at dvb_demux_poll+0x40/0x94 [dvb_core]
[  491.403262]     LR = do_sys_poll+0x1e8/0x434
[  491.403266] [EAE17B80] [EAE17BB4] 0xeae17bb4 (unreliable)
[  491.403270] [EAE17B90] [C0089D04] do_sys_poll+0x1e8/0x434
[  491.403276] [EAE17F20] [C0089FA0] sys_poll+0x50/0x60
[  491.403281] [EAE17F40] [C0010378] ret_from_syscall+0x0/0x38
[  491.403286] --- Exception: c01 at 0xff3903c
[  491.403290]     LR = 0xffbed70
[  491.403292] Instruction dump:
[ 491.403294] bf810010 7c9e2378 7c7c1b78 90010024 3c60f236 386363f0 8009baf0
81240080
[ 491.403301] 3c80f236 2f800000 38844fa0 83e90028 <83bf01d8> 41be0008
48003d55 801e0018
[  491.403309]  <1>Fixing recursive fault but reboot is needed!



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb




_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux