On 2/23/07, Bernhard Rosenkraenzer <bero@xxxxxxxxxxxx> wrote:
On Friday, 23. February 2007 12:03, Manu Abraham wrote: > You need to use the modified version of szap (temporarily) > ..http://kromtek.com/dvb/szap.c Thanks - but it doesn't help:
Works at my side and for a couple of others..looking at the logs,
[root@testbox szap]# ./patched_szap -c channels-conf/dvb-s/Astra-19.2E n24 reading channels from file 'channels-conf/dvb-s/Astra-19.2E' zapping to 34 'N24': sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x07ff, apid = 0x0800 sid = 0x002f Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' FE_DISEQC_SEND_MASTER_CMD failed: Connection timed out -------------------------------------------------------> Using 'STB0899 DVB-S' DVB-Sstatus 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe | ... While patched_szap is running, the driver logs these bits: stb0899_init: Initializing STB0899 ...
[..]
stb0899_search: Frequency=0, Srate=0
the application failed to send Frequency and symbol rate to the driver .. ? Did you use the patches or the tarball ? (You shouldn't see this issue if you are using the tree) If you used the patches, change MINOR VERSION from 1 to 2 in version.h and you are ahead. (Forgot to push in the version patch) will need to push in that as well. Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb