Re: Twinhan Starbox 2 on NSLU2 with kernel 2.6.20 and cvs driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hubert,



On Tue, 13 Feb 2007, Hubert_Becker@xxxxxxxxxxx wrote:

> I have successfully installed kernel 2.6.20 and the v4l cvs driver to
> get my Twinhan Starbox 2 running. But when loading the module i get an
> error:
> 
> Linux video capture interface: v2.00
> saa7146: register extension 'dvb'.
> usb 2-1: new full speed USB device using ohci_hcd and address 2
> usb 2-1: not running at top speed; connect to a high speed hub
> usb 2-1: configuration #1 chosen from 1 choice
> dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0 (VP7021)' in cold
> state, will try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-vp702x-02.fw'
> usb 2-1: USB disconnect, address 2
> dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0 (VP7021)' in warm
> state.
> dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a
> hardware PID filter)
> dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021) error while loading
> driver (-19)
> usbcore: registered new interface driver dvb_usb_vp702x
> usb 3-2: new high speed USB device using ehci_hcd and address 4
> usb 3-2: configuration #1 chosen from 1 choice
> dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0 (VP7021)' in cold
> state, will try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-vp702x-02.fw'
> dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0 (VP7021)' in warm
> state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (TwinhanDTV StarBox DVB-S USB2.0 (VP7021)).
> dvb-usb: MAC address: 00:08:ca:15:88:c7
> vp702x: system string: USB702X<
> DVB: registering frontend 0 (Twinhan DST-like frontend (VP7021/VP7020)
> DVB-S)...
> input: IR-receiver inside an USB DVB receiver as /class/input/input1
> dvb-usb: schedule remote query interval to 400 msecs.
> dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021) successfully
> initialized and connected.
> 
> Can anybody help here ?
> Regards
> 
> Hubert

There is an USB re-enumeration after firmware download. So from my point 
of view up to here everything is OK.

Patrick.

--
  Mail: patrick.boettcher@xxxxxxx
  WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux