Hi all! I have the card mentioned in the subject and i'm trying to use it in Kubuntu Edgy, but i can't. dmesg gives this result: [17207925.192000] usb 1-8: new high speed USB device using ehci_hcd and address 6 [17207925.332000] usb 1-8: configuration #1 chosen from 1 choice [17207925.332000] dvb-usb: found a 'DiBcom USB2.0 DVB-T reference design (MOD3000P)' in warm state. [17207925.332000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [17207925.336000] DVB: registering new adapter (DiBcom USB2.0 DVB-T reference design (MOD3000P)). [17207925.340000] dib3000: Found a DiBcom 3000P. [17207925.340000] DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)... [17207925.340000] input: IR-receiver inside an USB DVB receiver as /class/input/input5 [17207925.340000] dvb-usb: schedule remote query interval to 150 msecs. [17207925.340000] dvb-usb: DiBcom USB2.0 DVB-T reference design (MOD3000P) successfully initialized and connected. [17207925.340000] input: Yuan Digital TV as /class/input/input6 [17207925.340000] input: USB HID v1.11 Device [Yuan Digital TV] on usb-0000:00:1d.7-8 it seem's to be working properly. Then i try to get a channels.conf file with dvb-utils/examples/scan# scan dvb-t/es-Madrid|tee channels.conf and i get: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 770000000 0 2 1 3 1 3 0 initial transponder 810000000 0 2 1 3 1 3 0 initial transponder 834000000 0 2 1 3 1 3 0 initial transponder 842000000 0 2 1 3 1 3 0 initial transponder 850000000 0 2 1 3 1 3 0 initial transponder 858000000 0 2 1 3 1 3 0 >>> tune to: 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! and a lot of lines with >>>tuning failed!!! and i don't know what to do. May someone help me? Thanks _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
