Hallo! I tested the firmware and everything still woks. Sadly I still don't get any SNR Values different from 0. Any idea what might be wrong? It seems it has the capability: dvbsnoop -s signal -pd 9 -n 9 -timeout 1000 dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ DEMUX : /dev/dvb/adapter0/demux0 DVR : /dev/dvb/adapter0/dvr0 FRONTEND: /dev/dvb/adapter0/frontend0 --------------------------------------------------------- Transponder/Frequency signal strength statistics... max cycle count: 9 Capabilities: BER: 1 SNR: 1 SIG: 1 STAT: 1 UBLK: 1 --------------------------------------------------------- cycle: 1 d_time: 0.001 s Sig: 30675 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 2 d_time: 1.005 s Sig: 30715 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 3 d_time: 1.008 s Sig: 30749 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 4 d_time: 1.009 s Sig: 30733 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 5 d_time: 1.008 s Sig: 30670 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 6 d_time: 1.008 s Sig: 30643 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 7 d_time: 1.008 s Sig: 30637 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 8 d_time: 1.008 s Sig: 30630 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 9 d_time: 1.008 s Sig: 30640 SNR: 0 BER: 0 UBLK: 0 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] usb-storage: device scan complete dib0700: loaded with support for 2 different device-types dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-02-rc1.fw' dib0700: firmware started successfully. dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in warm state. **WARNING** I2C adapter driver [Uniwill STK7700P based (Hama and others)] forgot to specify physical device; fix it! dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Uniwill STK7700P based (Hama and others)). **WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it! DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Uniwill STK7700P based (Hama and others) successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 Regards Lynx _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
