$more TV Tuner: registering extension (Xceive 3028 Tuner) Linux video capture interface: v2.00 cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 CORE cx88[0]: subsystem: 107d:6f18, board: Winfast TV2000 XP Global [card=59,aut odetected] TV tuner 71 at 0xc2, Radio tuner 71 at 0xc2 tuner 1-0061: chip found @ 0xc2 (cx88[0]) Tuner: setting up tuner core extension for: Xceive 3028 Tuner ERROR TUNER TYPE NOT SUPPORTED (-623969260) cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 11, latency: 32, mmio: 0xe6000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 Loading base firmware: xc3028_init0.i2c.fw xc3028-tuner.c: Unable to load firmware xc3028-tuner.c: ** PLEASE HAVE A LOOK AT ** xc3028-tuner.c: http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Firmware xc3028_set_std, Loading specific configuration for requested mode xc3028_MN_NTSC PAL_A2.i2c.fw Loading configuration from file failed! xc3028-tuner.c: xc3028_set_std (no appropriate firmware to load) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
