Am Samstag, den 03.02.2007, 02:55 +0100 schrieb hermann pitton:
> Am Samstag, den 03.02.2007, 01:17 +0100 schrieb Emmanuel QUEMENER:
> > hermann pitton a écrit :
> >
> > > Am Freitag, den 02.02.2007, 20:43 +0100 schrieb Emmanuel QUEMENER:
[...]
> > What do you purpose ?
>
> There is also this 167000Hz positive frequency offset in France, but
> your initial scan file seem to take it already into account.
>
> If possible try analog TV too. You change the LNA configuration for
> analog in saa7134-cards.c for the test card=109 by setting
> .tuner_config = 3.
>
> [SAA7134_BOARD_PHILIPS_TIGER_S] = {
> .name = "Philips Tiger - S Reference design",
> .audio_clock = 0x00187de7,
> .tuner_type = TUNER_PHILIPS_TDA8290,
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> .tuner_config = 2,
> .mpeg = SAA7134_MPEG_DVB,
> .gpiomask = 0x0200000,
> .inputs = {{
> .name = name_tv,
> .vmux = 1,
> .amux = TV,
> .tv = 1,
> },{
>
> For DVB-T you do this in saa7134-dvb.c here.
>
> static struct tda1004x_config philips_tiger_s_config = {
> .demod_address = 0x08,
> .invert = 1,
> .invert_oclk = 0,
> .xtal_freq = TDA10046_XTAL_16M,
> .agc_config = TDA10046_AGC_TDA827X,
> .gpio_config = TDA10046_GP01_I,
> .if_freq = TDA10046_FREQ_045,
> .i2c_gate = 0x4b,
> .tuner_address = 0x61,
> .tuner_config = 2,
> .antenna_switch= 1,
> .request_firmware = philips_tda1004x_request_firmware
> };
Emmanuel,
also in saa7134-cards.c in saa7134_board_init2 to stay consistent.
On line 4397 after the eeprom detection.
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_PHILIPS_TIGER_S:
This configuration 3 is untested as announced by Hartmut.
Let's see if it can make a difference for you.
Hermann
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
