Am Samstag, den 03.02.2007, 02:55 +0100 schrieb hermann pitton: > Am Samstag, den 03.02.2007, 01:17 +0100 schrieb Emmanuel QUEMENER: > > hermann pitton a écrit : > > > > > Am Freitag, den 02.02.2007, 20:43 +0100 schrieb Emmanuel QUEMENER: [snip] > > For reference, this is what the other Asus tiger hybrid cards use. > Asus followed the Philips reference design, can't tell if this time too > for the tiger_s. At least you have only one antenna connector and no > radio. The analog audio mux is removed too and no firmware eeprom. > > static struct tda1004x_config philips_tiger_config = { > .demod_address = 0x08, > .invert = 1, > .invert_oclk = 0, > .xtal_freq = TDA10046_XTAL_16M, > .agc_config = TDA10046_AGC_TDA827X, > .gpio_config = TDA10046_GP11_I, > .if_freq = TDA10046_FREQ_045, > .i2c_gate = 0x4b, > .tuner_address = 0x61, > .tuner_config = 0, > .antenna_switch= 1, > .request_firmware = philips_tda1004x_request_firmware > }; oops, new variant of the old config is of course static struct tda1004x_config asus_p7131_dual_config = { .demod_address = 0x08, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_TDA827X, .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, .tuner_config = 0, .antenna_switch= 2, .request_firmware = philips_tda1004x_request_firmware }; which Hartmut kept for the antenna connector switch. Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb