Re: af9005, remote with lircd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



En/na Matthäus Janiczek ha escrit:

/Sorry for not replied earlier but i had to bought an new battery to be sure that the remote gets power :)
So, i tried
/sudo rmmod dvb-usb-af9005-remote
sudo modprobe dvb-usb-af9005-remote debug=1

/and /

///sudo rmmod dvb-usb-af9005-remote
sudo modprobe dvb-usb-af9005-remote debug=1 > raw_code_log//

It doesn't work that way, you have to look for the debug messages in /var/log/messages. Oh, and before unloading dvb-usb-af9005-remote, you have to unload dvb-usb-af9005


to load the module with debug=1 but nothing happend :(/
/So I tried to prepare everything for lirc, I followed the instruction.
after made /patch -p1 < af9005-config.diff
/in the v4l-dvb-kernel Directory i got this:
/
patching file linux/drivers/media/dvb/dvb-usb/Kconfig
Hunk #1 succeeded at 168 (offset -12 lines).
patching file linux/drivers/media/dvb/dvb-usb/Makefile
Hunk #1 FAILED at 42.
1 out of 1 hunk FAILED -- saving rejects to file linux/drivers/media/dvb/dvb-usb/Makefile.rej

Apply the patch *before* following the instructions in README.lirc.

Bye
--
Luca

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux