Torfinn Ingolfsen wrote: > Hello, > > I recently got my hands on a Terratec Cinergy 1200 DVB-C at an > acceptable price, and thought I would do some testing with it. > I installed Xubuntu 6.10 (which uses kernel 2.6.17-10) on the test > machine. > The card was detected, but there were some errors in the dmesg output: > > Complete dmesgs are at this page: > http://tingox.googlepages.com/c1200dvb-c_linux I'm using a Cinergy 1200 DVB-C (Suse 10.1, kernel 2.6.18.5, current dvb drivers from linuxtv.org) without any problems. It seems, that the DVB card shares its interrupt with another card/device: [17179586.112000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209 [17179586.460000] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 209 This may be the problem. You should remove the other card (if it is possible) and try it again. - Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
