On 12/8/06, Alberto Segura <ass06@xxxxxx> wrote:
Hi all! Recently I have bought an Wintv HVR 900 usb 2.0 stick for watching tv on my ubuntu edgy (2.6.17-10-386). The card is supposed to have the ability to tune analog and dvb channels, but, at the moment, no way...
--- http://linuxtv.org/v4lwiki/index.php/Em2880#Devices Hauppauge HVR 900 M/R: 65018/B2C0 (Sticker on the device, only analogue TV is supported at the moment) ---
[17179613.980000] tveeprom 5-0050: Hauppauge model 65018, rev B2C0, serial# 1023804
--- - no comment - Markus
I think that the card is supported in the wiki, and here is some useful information that my linux gives me about it: * *lsusb* Bus 003 Device 002: ID 2040:6502 Hauppauge * *xawtv -hwscan* This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386) looking for available devices port 245-245 [ -xvport 245 ] type : Xvideo, video overlay name : video4linux port 246-246 type : Xvideo, image scaler name : NV17 Video Texture port 247-278 type : Xvideo, image scaler name : NV05 Video Blitter /dev/video0: OK [ -device /dev/video0 ] ------> /Another saa7134 pci tuner in my pc (not tunning too)/ type : v4l2 name : Pinnacle PCTV Stereo (saa7134) flags: overlay capture tuner /dev/video1: OK [ -device /dev/video1 ] ------> /The card I want to make work!!!/ type : v4l2 name : Hauppauge WinTV HVR Rev. 1.2 flags: capture tuner * *dmesg* [17179613.440000] usb 3-6: new high speed USB device using ehci_hcd and address 2 [17179613.576000] usb 3-6: configuration #1 chosen from 1 choice [17179613.576000] em28xx new video device (2040:6502): interface 0, class 255 [17179613.576000] em28xx #0: Alternate settings: 8 [17179613.576000] em28xx #0: Alternate setting 0, max size= 0 [17179613.576000] em28xx #0: Alternate setting 1, max size= 0 [17179613.576000] em28xx #0: Alternate setting 2, max size= 1448 [17179613.576000] em28xx #0: Alternate setting 3, max size= 2048 [17179613.576000] em28xx #0: Alternate setting 4, max size= 2304 [17179613.576000] em28xx #0: Alternate setting 5, max size= 2580 [17179613.576000] em28xx #0: Alternate setting 6, max size= 2892 [17179613.576000] em28xx #0: Alternate setting 7, max size= 3072 [17179613.948000] tuner 5-0061: chip found @ 0xc2 (em28xx #0) [17179613.948000] attach inform (default): detected I2C address c2 [17179613.956000] attach_inform: eeprom detected. [17179613.980000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [17179613.980000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [17179613.980000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [17179613.980000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [17179613.980000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179613.980000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179613.980000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [17179613.980000] em28xx #0: i2c eeprom 70: 32 00 37 00 35 00 35 00 35 00 36 00 34 00 34 00 [17179613.980000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [17179613.980000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [17179613.980000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [17179613.980000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 3c 9f [17179613.980000] em28xx #0: i2c eeprom c0: 0f f0 74 02 01 00 01 79 60 00 00 00 00 00 00 00 [17179613.980000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [17179613.980000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 3c 9f [17179613.980000] em28xx #0: i2c eeprom f0: 0f f0 74 02 01 00 01 79 60 00 00 00 00 00 00 00 [17179613.980000] EEPROM ID= 0x9567eb1a [17179613.980000] Vendor/Product ID= 2040:6502 [17179613.980000] AC97 audio (5 sample rates) [17179613.980000] 500mA max power [17179613.980000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [17179613.980000] tveeprom 5-0050: Hauppauge model 65018, rev B2C0, serial# 1023804 [17179613.980000] tveeprom 5-0050: tuner model is Xceive XC3028 (idx 120, type 71) [17179613.980000] tveeprom 5-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [17179613.980000] tveeprom 5-0050: audio processor is None (idx 0) [17179613.980000] tveeprom 5-0050: has radio [17179613.984000] Tuner: setting up tuner core extension for: Xceive 3028 Tuner [17179613.984000] Loading base firmware: xc3028_8MHz_init0.i2c.fw [17179615.164000] Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw [17179615.224000] xc3028-tuner.c: sending extra call for DVB-T [17179615.224000] Loading base firmware: xc3028_init0.i2c.fw [17179616.304000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw [17179617.500000] em28xx-video.c: requesting em28xx-audio! [17179617.504000] em28xx #0: V4L2 VBI device registered as /dev/vbi1 [17179617.504000] em28xx #0: V4L2 device registered as /dev/video1 [17179617.504000] em2880-dvb.c: DVB Init [17179617.504000] em2880-dvb.c: unsupported device [17179617.504000] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator [17179617.504000] em2880-dvb.c: retrying with mt352 DVB-T demodulator [17179617.504000] FIXME: Write failed, backtrace: [17179617.504000] =============================== [17179617.504000] 7f [17179617.504000] ================================ [17179617.504000] mt352_read_register: readreg error (reg=127, ret==-19) [17179617.504000] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb [17179617.504000] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1" [17179617.504000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2 ... For installing it, I download mercurial from ubuntu repository, download the latest driver from Markus Rechberger (linuxtv) and extract firmware_3.tgz in /lib/firmware, I have also em28xx device_mode=1 and em2880-dvb in /etc/modules for loading at boot... As I told you before I am not able to tune analog or dvb channels using tvtime-scanner -d /dev/video1 (tvtime) or scantv -c /dev/video1 (xawtv) I hope someone can give me ideas. Thanks in advance. Alberto. ______________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
-- Markus Rechberger _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
