Hi all!
Recently I have bought an Wintv HVR 900 usb 2.0 stick for watching tv
on my ubuntu edgy (2.6.17-10-386). The card is supposed to have the
ability to tune analog and dvb channels, but, at the moment, no way... I
think that the card is supported in the wiki, and here is some useful
information that my linux gives me about it:
* *lsusb*
Bus 003 Device 002: ID 2040:6502 Hauppauge
* *xawtv -hwscan*
This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386)
looking for available devices
port 245-245 [ -xvport 245 ]
type : Xvideo, video overlay
name : video4linux
port 246-246
type : Xvideo, image scaler
name : NV17 Video Texture
port 247-278
type : Xvideo, image scaler
name : NV05 Video Blitter
/dev/video0: OK [ -device /dev/video0 ] ------>
/Another saa7134 pci tuner in my pc (not tunning too)/
type : v4l2
name : Pinnacle PCTV Stereo (saa7134)
flags: overlay capture tuner
/dev/video1: OK [ -device /dev/video1 ] ------>
/The card I want to make work!!!/
type : v4l2
name : Hauppauge WinTV HVR Rev. 1.2
flags: capture tuner
* *dmesg*
[17179613.440000] usb 3-6: new high speed USB device using ehci_hcd and
address 2
[17179613.576000] usb 3-6: configuration #1 chosen from 1 choice
[17179613.576000] em28xx new video device (2040:6502): interface 0,
class 255
[17179613.576000] em28xx #0: Alternate settings: 8
[17179613.576000] em28xx #0: Alternate setting 0, max size= 0
[17179613.576000] em28xx #0: Alternate setting 1, max size= 0
[17179613.576000] em28xx #0: Alternate setting 2, max size= 1448
[17179613.576000] em28xx #0: Alternate setting 3, max size= 2048
[17179613.576000] em28xx #0: Alternate setting 4, max size= 2304
[17179613.576000] em28xx #0: Alternate setting 5, max size= 2580
[17179613.576000] em28xx #0: Alternate setting 6, max size= 2892
[17179613.576000] em28xx #0: Alternate setting 7, max size= 3072
[17179613.948000] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[17179613.948000] attach inform (default): detected I2C address c2
[17179613.956000] attach_inform: eeprom detected.
[17179613.980000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0
12 5c 03 82 1e 6a 18
[17179613.980000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00
00 00 00 00 00 00 00
[17179613.980000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8
00 00 00 5b e0 00 00
[17179613.980000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10
01 01 01 00 00 00 00
[17179613.980000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
[17179613.980000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
[17179613.980000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00
00 18 03 34 00 30 00
[17179613.980000] em28xx #0: i2c eeprom 70: 32 00 37 00 35 00 35 00 35
00 36 00 34 00 34 00
[17179613.980000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e
00 54 00 56 00 20 00
[17179613.980000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39
00 30 00 30 00 00 00
[17179613.980000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4
78 23 fa fd d0 28 89
[17179613.980000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01
01 20 77 00 40 3c 9f
[17179613.980000] em28xx #0: i2c eeprom c0: 0f f0 74 02 01 00 01 79 60
00 00 00 00 00 00 00
[17179613.980000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4
78 23 fa fd d0 28 89
[17179613.980000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01
01 20 77 00 40 3c 9f
[17179613.980000] em28xx #0: i2c eeprom f0: 0f f0 74 02 01 00 01 79 60
00 00 00 00 00 00 00
[17179613.980000] EEPROM ID= 0x9567eb1a
[17179613.980000] Vendor/Product ID= 2040:6502
[17179613.980000] AC97 audio (5 sample rates)
[17179613.980000] 500mA max power
[17179613.980000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[17179613.980000] tveeprom 5-0050: Hauppauge model 65018, rev B2C0,
serial# 1023804
[17179613.980000] tveeprom 5-0050: tuner model is Xceive XC3028 (idx
120, type 71)
[17179613.980000] tveeprom 5-0050: TV standards PAL(B/G) PAL(I)
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[17179613.980000] tveeprom 5-0050: audio processor is None (idx 0)
[17179613.980000] tveeprom 5-0050: has radio
[17179613.984000] Tuner: setting up tuner core extension for: Xceive
3028 Tuner
[17179613.984000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[17179615.164000] Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
[17179615.224000] xc3028-tuner.c: sending extra call for DVB-T
[17179615.224000] Loading base firmware: xc3028_init0.i2c.fw
[17179616.304000] Loading default analogue TV settings:
xc3028_BG_PAL_A2_A.i2c.fw
[17179617.500000] em28xx-video.c: requesting em28xx-audio!
[17179617.504000] em28xx #0: V4L2 VBI device registered as /dev/vbi1
[17179617.504000] em28xx #0: V4L2 device registered as /dev/video1
[17179617.504000] em2880-dvb.c: DVB Init
[17179617.504000] em2880-dvb.c: unsupported device
[17179617.504000] em2880-dvb.c: failed initializing zl10353 DVB-T
demodulator
[17179617.504000] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[17179617.504000] FIXME: Write failed, backtrace:
[17179617.504000] ===============================
[17179617.504000] 7f
[17179617.504000] ================================
[17179617.504000] mt352_read_register: readreg error (reg=127, ret==-19)
[17179617.504000] em2880-dvb.c: no luck with mt352 demodulator, not
attaching em2880-dvb
[17179617.504000] em2880-dvb.c: DVB-T demodulator not reachable, did you
try "modprobe em28xx device_mode=1"
[17179617.504000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2
... For installing it, I download mercurial from ubuntu repository,
download the latest driver from Markus Rechberger (linuxtv) and extract
firmware_3.tgz in /lib/firmware, I have also em28xx device_mode=1 and
em2880-dvb in /etc/modules for loading at boot...
As I told you before I am not able to tune analog or dvb channels
using tvtime-scanner -d /dev/video1 (tvtime) or scantv -c /dev/video1
(xawtv)
I hope someone can give me ideas.
Thanks in advance.
Alberto.
______________________________________________
LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
