Andrew de Quincey wrote: >> andrea@nb-venturi:~$ dvbstream -f 10847 -p V -o 8192 > /dev/null >> dvbstream v0.6 - (C) Dave Chapman 2001-2004 >> Released under the GPL. >> Latest version available from http://www.linuxstb.org/ >> Tuning to 10847 Hz >> Using DVB card "Philips TDA10086 DVB-S", freq=10847 >> tuning DVB-S to Freq: 1097000, Pol:V Srate=0, 22kHz tone=off, LNB: 0 >> Setting only tone OFF and voltage 13V > > Your symbol rate is set to 0 - so its not gonna lock anyway. /BUT/ you're > quite right, this should be detected and not caused an oops - I'll get a > patch with some sanity checks together. Thanks for the report. > you are right if i put the symbol rate, i get the LOCK and no oops at all. see at the bottom if i miss the symbol rate, i get the oops. it doesn't matter what the other params are set. it seems it's all about the symbol rate andrea@nb-venturi:~$ dvbstream -f 10847000 -s 22000 -p V -o 8192 > /tmp/prova.ts dvbstream v0.6 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Tuning to 10847000 Hz Using DVB card "Philips TDA10086 DVB-S", freq=10847000 tuning DVB-S to Freq: 1097000, Pol:V Srate=22000000, 22kHz tone=off, LNB: 0 Setting only tone OFF and voltage 13V DISEQC SETTING SUCCEDED Getting frontend status Event: Frequency: 10847875 SymbolRate: 26293317 FEC_inner: 5 Bit error rate: 6035 Signal strength: 17476 SNR: 24672 UNC: 6 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC dvbstream will stop after -1 seconds (71582788 minutes) Output to stdout Streaming 1 stream Caught signal 2 - closing cleanly. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
