On Saturday 18 November 2006 19:42, Sven Lankes wrote: > On Sat, Nov 18, 2006 at 01:20:14AM +0000, Andrew de Quincey wrote: > > Just tried my card - it reports the following, and the TDA10021 is > > detected ok: > > saa7146: found saa7146 @ mem d0994800 (revision 1, irq 185) > > (0x153b,0x1156). Its a rebadged KNC1 DVBC card - Terratec Cinergy. I > > dunno quite what to suggest now... obviously SOMETHING is different (as > > it works in windows), but AFAIK, it should be working with the original > > code. > > Hmm, I see the tda10021 has a configurable i2c address; could you give > > the attached patch a go? > > I did. > > The result is: > > [17179846.012000] ACPI: PCI interrupt for device 0000:00:09.0 disabled > [17179850.988000] saa7146: register extension 'budget_av'. > [17179850.988000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, > low) -> IRQ 185 [17179850.988000] saa7146: found saa7146 @ mem e0ab6c00 > (revision 1, irq 185) (0x1894,0x0020). [17179850.988000] saa7146 (0): dma > buffer size 192512 > [17179850.988000] DVB: registering new adapter (KNC1 DVB-C). > [17179851.052000] adapter failed MAC signature check > [17179851.052000] encoded MAC from EEPROM was > ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff > [17179851.584000] KNC1-0: MAC addr = 00:09:d6:ff:f1:0d > [17179851.744000] DVB: registering frontend 0 (Philips TDA10021 DVB-C)... > [17179851.744000] budget-av: ci interface initialised. > > Thanks a lot. > > I'm going to find out now if that means I can actually get a picture out > of the card now. Yay! Okdoke, I'll get a proper patch going for mainline. I wonder why they changed the i2c address. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
