On Sat, Nov 18, 2006 at 01:20:14AM +0000, Andrew de Quincey wrote: > Just tried my card - it reports the following, and the TDA10021 is detected > ok: > saa7146: found saa7146 @ mem d0994800 (revision 1, irq 185) (0x153b,0x1156). > Its a rebadged KNC1 DVBC card - Terratec Cinergy. I dunno quite what to > suggest now... obviously SOMETHING is different (as it works in windows), but > AFAIK, it should be working with the original code. > Hmm, I see the tda10021 has a configurable i2c address; could you give the > attached patch a go? I did. The result is: [17179846.012000] ACPI: PCI interrupt for device 0000:00:09.0 disabled [17179850.988000] saa7146: register extension 'budget_av'. [17179850.988000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 185 [17179850.988000] saa7146: found saa7146 @ mem e0ab6c00 (revision 1, irq 185) (0x1894,0x0020). [17179850.988000] saa7146 (0): dma buffer size 192512 [17179850.988000] DVB: registering new adapter (KNC1 DVB-C). [17179851.052000] adapter failed MAC signature check [17179851.052000] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [17179851.584000] KNC1-0: MAC addr = 00:09:d6:ff:f1:0d [17179851.744000] DVB: registering frontend 0 (Philips TDA10021 DVB-C)... [17179851.744000] budget-av: ci interface initialised. Thanks a lot. I'm going to find out now if that means I can actually get a picture out of the card now. -- sven _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
