Snapshot of linuxtv from 12.11.06, linux kernel 2.6.17 ---------------dmesg----------------------------------------------------------- Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: snapshot date 2006-07-17 bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). PCI: Found IRQ 15 for device 0000:00:0a.0 PCI: Sharing IRQ 15 with 0000:00:0c.0 PCI: Sharing IRQ 15 with 0000:00:0a.1 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 15, latency: 32, mmio: 0xd7401000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:000 1 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00f500fe [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Found IRQ 15 for device 0000:00:0a.1 PCI: Sharing IRQ 15 with 0000:00:0c.0 PCI: Sharing IRQ 15 with 0000:00:0a.0 bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 15, latency: 32, memory: 0xd7402000 DVB: registering new adapter (bttv0). dst(0) dst_comm_init: Initializing DST. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) rdc_reset_state: Resetting state machine dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) dst(0) dst_error_recovery: Trying to return from previous errors. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) read_dst: reply is 0xff dst(0) dst_wait_dst_ready: dst wait ready after 1 dst(0) read_dst: reply is 0x6 0x1b 0x16 0x3d 0x30 0x33 0x5c 0x39 dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_get_device_id: Checksum failure! dst(0) dst_probe: unknown device. frontend_init: Could not find a Twinhan DST. dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001 ---------------dmesg end------------------------------------------------------- This card currently is not supported at all :-( P.S. It looks like the problem: >Re: No frontend for Twinhan VP-1022A Ver 2.0 >Marius van den Beek >Mon, 16 Oct 2006 01:31:59 -0700 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb