Hello, I have tried to install the AVerTV Hybrid+FM PCI. Looking inside the card we can see that it has the next chips: Philips SAA7135HL/203 Zarlink MT352 XCEIVE XC3018 ACQ hg clone http://linuxtv.org/hg/v4l-dvb cd v4l-dvb make make install In the cardlist.saa7134 I didn't found my card but I have tried this: modprobe saa7134 card=99 modprobe saa77134_dvb with the next result: saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 22, latency: 32, mmio: 0xd3005000 saa7133[0]: subsystem: 1461:f936, board: AVerMedia TV Hybrid A16AR [card=99,insmod option] saa7133[0]: board init: gpio is 2fa00 saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 3-0061: chip found @ 0xc2 (saa7133[0]) tuner 3-0061: type set to 62 (Philips TEA5767HN FM Radio) saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7133[0]: avertv 777 dvb setup mt352_read_register: readreg error (reg=127, ret==-5) saa7133[0]: frontend initialization failed This isn't working. After this I have tried the next option: modprobe saa7134 card=85 modprobe saa77134_dvb saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 22, latency: 32, mmio: 0xd3005000 saa7133[0]: subsystem: 1461:f936, board: AverTV DVB-T 777 [card=85,insmod option] saa7133[0]: board init: gpio is effffff saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: avertv 777 dvb setup DVB: registering new adapter (saa7133[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... With this option I can see the signal from a S-Video source but I can't tuning to any channel: scan dvb-apps-92cd5208d2cf/util/scan/dvb-t/es-Mussara | tee channels.conf scanning dvb-apps-92cd5208d2cf/util/scan/dvb-t/es-Mussara using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 778000000 0 2 9 3 1 3 0 initial transponder 818000000 0 2 9 3 1 3 0 initial transponder 834000000 0 2 9 3 1 3 0 initial transponder 842000000 0 2 9 3 1 3 0 initial transponder 850000000 0 2 9 3 1 3 0 initial transponder 858000000 0 2 9 3 1 3 0 >>> tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! Thanks in advance and sorry for my English. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
