Re: TechnoTrend Budget T-1500 DVB-T CI doesn't find any channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 02, 2006 at 10:16:46AM +0100, Perceval Anichini wrote:
> > [...]
> > Tried that patch before. Forgot to say that. Made no difference.
> 	Well, you need it anyway. Btw, afaik the card does not support
> auto inversion. So you'll have to specify it (off is good for france)
> 
> > When I add 166 Mhz I get the same result:
> 	Well, i made a mistake, i meant 166kHz :/
> 
> Could you try 586166000, with inversion set to off ?
> 
> It works for me, it shall works for you :)
> 
> Perceval.
> 

Unfortunately it doesn't seem to do that:

# scan -i0 se-o       
scanning se-o
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 586000000 0 2 0 3 1 2 0
initial transponder 538000000 0 2 0 3 1 2 0
initial transponder 506000000 0 2 0 3 1 2 0
initial transponder 698000000 0 2 0 3 1 2 0
initial transponder 746000000 0 2 0 3 1 2 0
>>> tune to: 586000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 586000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 538000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 538000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 506000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 506000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 698000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 746000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.


# scan -i0 se-o-166Hz 
scanning se-o-166Hz
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 586166000 0 2 0 3 1 2 0
initial transponder 538166166 0 2 0 3 1 2 0
initial transponder 506166166 0 2 0 3 1 2 0
initial transponder 698166166 0 2 0 3 1 2 0
initial transponder 746166166 0 2 0 3 1 2 0
>>> tune to: 586166000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 586166000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 538166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 538166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 506166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 506166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 698166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 698166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 746166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 746166166:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K
:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


# scan -i1  se-o
scanning se-o
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 586000000 0 2 0 3 1 2 0
initial transponder 538000000 0 2 0 3 1 2 0
initial transponder 506000000 0 2 0 3 1 2 0
initial transponder 698000000 0 2 0 3 1 2 0
initial transponder 746000000 0 2 0 3 1 2 0
>>> tune to: 586000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 538000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 506000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 698000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 746000000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.


# scan -i1  se-o-166Hz 
scanning se-o-166Hz
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 586166000 0 2 0 3 1 2 0
initial transponder 538166166 0 2 0 3 1 2 0
initial transponder 506166166 0 2 0 3 1 2 0
initial transponder 698166166 0 2 0 3 1 2 0
initial transponder 746166166 0 2 0 3 1 2 0
>>> tune to: 586166000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 586166000:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 538166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 538166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 506166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 506166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 698166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 698166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 746166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 746166166:INVERSION_ON:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


I'm beginning to suspect this card is defect or something. I'll see if I 
get a chance to try it in windows..

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux