On Tue, Oct 24, 2006 at 09:48:07PM +0200, Jon Forsberg wrote: > On Tue, Oct 24, 2006 at 04:05:50PM +0200, Klaus Schmidinger wrote: > > Sounds like the same problem I had. The card generates a +5V power > > supply for active antennas. If your antenna shorts the power, the > > card won't receive anything. > > > > There is a jumper on the card which you can remove to turn the power off. > > > > Klaus > > I removed it but it didn't seem to help. :/ Just to be sure: it's > the jumper that sits by itself, right? (There are four or five other > jumpers that sits together in another location) > > Anyway, thanks for the info! > I guess the next step will be to try it in another location with another > antenna.. Ok, now I've tried with another antenna, both with the jumper removed and in place. Have also tried different values for the -i option to scan. Still doesn't work. It apparently detects that there's _something_ on the frequencies I supply because if I use the wrong frequencies or wrong value for the -i option I get "tuning failed!!!" instead of "filter timeout". I bit more info: Kernel and drivers tested: Vanilla 2.6.16.29 + drivers shipped with that kernel Vanilla 2.6.17.14 + drivers from dvb mercery 2006-10-24 Versions of scan tested: scan from dvb-apps from dvb mercery 2006-10-24 scan from dvb-utils 1.1.0 (debian) lspci -v -v: 0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root> 0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fd900000-fe9fffff Prefetchable memory behind bridge: f3e00000-f7dfffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at ef00 [size=32] 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 3 Region 4: I/O ports at ef20 [size=32] 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 4: I/O ports at ef40 [size=32] 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at ef80 [size=32] 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <available only to root> 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: f7e00000-f7efffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc. P4P800 Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K] 0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 85) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G450 Dual Head Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 0x04 (16 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: <available only to root> 0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Asustek Computer, Inc.: Unknown device 8026 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d800 [size=256] Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <available only to root> 0000:02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7efe000 (32-bit, prefetchable) [size=4K] Capabilities: <available only to root> 0000:02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7eff000 (32-bit, prefetchable) [size=4K] Capabilities: <available only to root> 0000:02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) Subsystem: Creative Labs: Unknown device 8066 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at df80 [size=32] Capabilities: <available only to root> 0000:02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at dff0 [size=8] Capabilities: <available only to root> 0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH: Unknown device 1012 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=512] Kernel messages while loading modules (2.6.17.14 + dvb mercery): Oct 27 15:12:12 x kernel: saa7146: register extension 'budget_ci dvb'. Oct 27 15:12:12 x kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 Oct 27 15:12:12 x kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> Oct 27 15:12:12 x kernel: saa7146: found saa7146 @ mem e094a400 (revision 1, irq 11) (0x13c2,0x1012). Oct 27 15:12:12 x kernel: saa7146 (0): dma buffer size 192512 Oct 27 15:12:12 x kernel: DVB: registering new adapter (TT-Budget-T-CI PCI). Oct 27 15:12:12 x kernel: adapter has MAC addr = 00:d0:5c:04:42:7c Oct 27 15:12:12 x kernel: input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3 Oct 27 15:12:12 x kernel: budget_ci: CI interface initialised Oct 27 15:12:12 x kernel: DVB: registering frontend 0 (Philips TDA10046H DVB-T)... And while using scan: Oct 27 15:12:31 x kernel: tda1004x: setting up plls for 53MHz sampling clock Oct 27 15:12:32 x kernel: tda1004x: found firmware revision 20 -- ok _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
