-----Original Message----- Date: Fri, 27 Oct 2006 09:08:38 +0200 Subject: HVR1110, no signal lock on tda8290 From: tomlohave <tomlohave@xxxxxxxxx> To: linux-dvb@xxxxxxxxxxx Hi, After some researchs, it seems that tuner on hvr110 is a Philips 8275A. with the app Productinfo provide by Hauppauge : Begin : Model 67019 Rev. B1B4 Serial #XXXXXXXXXXXXXX Tuner Model/Formats: Philips 8275A // (MN/BG/I/DK/LL') / DVB-T (FM) Tuner Audio: Stereo (SAA7131) Video Formats: NTSC ( M ) PAL ( B G H I D K M N NCOMBO ) SECAM ( L L' ) Audio Outputs: None External Inputs: 2 S-Video Inputs: 2 Teletext: Radio: FM Decoder: SAA7131 IR: Blaster MAC Address: 00-0D-FE-0C-E8-F1 EEprom Contents: 84 09 00 04 20 77 00 40 f0 1a 0c f0 73 05 29 00 84 08 00 06 cb 05 01 00 94 18 89 72 07 70 73 09 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72 10 01 72 11 ff 79 58 end. But i have no lock with this settings : <snip> I don't have the patch here, but: - If you live in france, you need to set the option secam=l - For this card, you need some GPIO settings to get the AGC routed correctly. for FM Radio, you typically need GPIO21 of the SAA7131 and for DVB-T it typically is GPIO 1 of the TDA10046. Somebody reported that the card works with the settings for the Pinnacle 310i, so you might steal the code fragments from there. Good luck Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
