Hi,
After some researchs, it seems that tuner on hvr110 is a Philips 8275A.
with the app Productinfo provide by Hauppauge :
Begin :
Model 67019 Rev. B1B4
Serial #XXXXXXXXXXXXXX
Tuner Model/Formats: Philips 8275A // (MN/BG/I/DK/LL') / DVB-T (FM)
Tuner Audio: Stereo (SAA7131)
Video Formats: NTSC ( M ) PAL ( B G H I D K M N NCOMBO ) SECAM ( L L' )
Audio Outputs: None
External Inputs: 2
S-Video Inputs: 2
Teletext:
Radio: FM
Decoder: SAA7131
IR: Blaster
MAC Address: 00-0D-FE-0C-E8-F1
EEprom Contents:
84 09 00 04 20 77 00 40 f0 1a 0c f0
73 05 29 00
84 08 00 06 cb 05 01 00 94 18 89
72 07 70
73 09 23 5f
73 0a fc 72
72 0b 2f
72 0e 01
72 0f 03
72 10 01
72 11 ff
79 58
end.
But i have no lock with this settings :
dmesg output :
[17181154.392000] Linux video capture interface: v2.00
[17181154.468000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17181154.472000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] ->
GSI 12 (
level, low) -> IRQ 12
[17181154.472000] saa7133[0]: found at 0000:00:12.0, rev: 209, irq: 12,
latency:
32, mmio: 0xe7101000
[17181154.472000] saa7133[0]: subsystem: 0070:6701, board: Hauppauge
WinTV-HVR11
10 DVB-T/Hybrid [card=103,autodetected]
[17181154.476000] saa7133[0]: board init: gpio is 6400000
[17181154.640000] input: saa7134 IR (Hauppauge WinTV-HVR as
/class/input/input6
[17181154.788000] saa7133[0]: i2c xfer: < a0 >
[17181154.796000] saa7133[0]: i2c xfer: < a0 >
[17181154.804000] tveeprom i2c attach [addr=0x50,client=tveeprom]
[17181154.804000] saa7133[0]: i2c xfer: < 84 ERROR: NO_DEVICE
[17181154.804000] saa7133[0]: i2c xfer: < 86 ERROR: NO_DEVICE
[17181154.804000] saa7133[0]: i2c xfer: < 94 ERROR: NO_DEVICE
[17181154.804000] saa7133[0]: i2c xfer: < 96 >
[17181154.812000] saa7133[0]: i2c xfer: < 96 01 02 >
[17181154.820000] saa7133[0]: i2c xfer: < 96 00 00 >
[17181154.828000] saa7133[0]: i2c xfer: < 96 07 >
[17181154.836000] saa7133[0]: i2c xfer: < 97 =00 >
[17181154.844000] saa7133[0]: i2c xfer: < 96 01 04 >
[17181154.852000] saa7133[0]: i2c xfer: < 96 00 00 >
[17181154.860000] saa7133[0]: i2c xfer: < 96 07 >
[17181154.868000] saa7133[0]: i2c xfer: < 97 =7b >
[17181154.876000] tuner 1-004b: chip at addr 4b is a tda8290
[17181154.876000] tuner 1-004b: Setting mode_mask to 0x0e
[17181154.876000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[17181154.876000] tuner i2c attach [addr=0x4b,client=(tuner unset)]
[17181154.876000] tuner 1-004b: Calling set_type_addr for type=54,
addr=0xff, mo
de=0x04
[17181154.876000] tuner 1-004b: set addr for type -1
[17181154.876000] tuner 1-004b: tuner 0x4b: called during i2c_client
register by
adapter's attach_inform
[17181154.876000] saa7133[0]: i2c xfer: < 96 21 c0 >
[17181154.908000] saa7133[0]: i2c xfer: < c1 ERROR: NO_DEVICE
[17181154.908000] saa7133[0]: i2c xfer: < c3 =48 >
[17181154.916000] saa7133[0]: i2c xfer: < c5 ERROR: NO_DEVICE
[17181154.916000] saa7133[0]: i2c xfer: < c7 ERROR: NO_DEVICE
[17181154.916000] saa7133[0]: i2c xfer: < 96 21 00 >
[17181154.924000] tuner 1-004b: setting tuner address to 61
[17181154.924000] saa7133[0]: i2c xfer: < 96 21 c0 >
[17181154.956000] saa7133[0]: i2c xfer: < c3 =48 >
[17181154.964000] tuner 1-004b: type set to tda8290+75a
[17181154.964000] saa7133[0]: i2c xfer: < 96 21 c0 >
[17181154.996000] saa7133[0]: i2c xfer: < c2 00 00 00 00 dc 05 8b 0c 04
20 ff 00
00 4b >
[17181155.004000] saa7133[0]: i2c xfer: < 96 21 00 >
[17181155.012000] saa7133[0]: i2c xfer: < 96 30 6f >
[17181155.020000] saa7133[0]: i2c xfer: < 96 20 0b >
[17181155.028000] tuner 1-004b: saa7133[0] tuner I2C addr 0x96 with type
54 used
for 0x0e
[17181155.028000] saa7133[0]: i2c xfer: < c0 ERROR: NO_DEVICE
[17181155.028000] saa7133[0]: i2c xfer: < c2 ERROR: NO_DEVICE
[17181155.028000] saa7133[0]: i2c xfer: < c4 ERROR: NO_DEVICE
[17181155.028000] saa7133[0]: i2c xfer: < c6 ERROR: NO_DEVICE
[17181155.028000] saa7133[0]: i2c xfer: < c8 ERROR: NO_DEVICE
[17181155.028000] saa7133[0]: i2c xfer: < ca ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < cc ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < ce ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < d0 ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < d2 ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < d4 ERROR: NO_DEVICE
[17181155.032000] saa7133[0]: i2c xfer: < d6 ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < d8 ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < da ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < dc ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < de ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < f5 ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < 8f ERROR: NO_DEVICE
[17181155.036000] saa7133[0]: i2c xfer: < a0 00 >
[17181155.044000] saa7133[0]: i2c xfer: < a1 =70 =00 =01 =67 =54 =20 =1c
=00 =43
=43 =a9 =1c =55 =d2 =b2 =92 =ff =ff =ff =0e =ff =20 =ff =ff =ff =ff =ff
=ff =ff
=ff =ff =ff =01 =40 =01 =32 =32 =01 =01 =33 =88 =ff =00 =aa =ff =ff =ff
=ff =ff
=ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =21 =00
=c2 =96
=10 =03 =32 =15 =60 =ff =ff =ff =ff =ff =ff =ff =00 =00 =00 =00 =00 =00
=00 =00
=00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00
=00 =00
=00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00 =00
=00 >
[17181155.068000] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43
43 a9 1c
55 d2 b2 92
[17181155.068000] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff
ff ff ff
ff ff ff ff
[17181155.068000] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88
ff 00 aa
ff ff ff ff
[17181155.068000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff
ff ff ff
ff ff ff ff
[17181155.068000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15
60 ff ff
ff ff ff ff
[17181155.068000] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00
00 00 00
00 00 00 00
[17181155.068000] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00
00 00 00
00 00 00 00
[17181155.068000] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00
00 00 00
00 00 00 00
[17181155.072000] saa7133[0]: i2c xfer: < 10 3c 33 68 >
[17181155.080000] tuner 1-004b: Cmd VIDIOC_S_STD accepted for analog TV
[17181155.080000] tuner 1-004b: switching to v4l2
[17181155.080000] tuner 1-004b: tv freq set to 400.00
[17181155.080000] tuner 1-004b: setting tda8290 to system B
[17181155.080000] saa7133[0]: i2c xfer: < 96 01 02 >
[17181155.088000] saa7133[0]: i2c xfer: < 96 02 00 >
[17181155.096000] saa7133[0]: i2c xfer: < 96 00 00 >
[17181155.112000] saa7133[0]: i2c xfer: < 96 01 82 >
[17181155.120000] saa7133[0]: i2c xfer: < 96 28 14 >
[17181155.128000] saa7133[0]: i2c xfer: < 96 0f 88 >
[17181155.136000] saa7133[0]: i2c xfer: < 96 05 04 >
[17181155.144000] saa7133[0]: i2c xfer: < 96 0d 47 >
[17181155.152000] saa7133[0]: i2c xfer: < 96 21 c0 >
[17181155.184000] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 0c 04
20 ff e0
00 39 >
[17181155.192000] saa7133[0]: i2c xfer: < c2 60 3c >
[17181155.200000] saa7133[0]: i2c xfer: < c2 a0 c0 >
[17181155.216000] saa7133[0]: i2c xfer: < c2 30 10 >
[17181155.476000] saa7133[0]/ir: build_key gpio=0x6400000 mask=0x0 data=0
[17181155.780000] saa7133[0]: i2c xfer: < c2 50 bf >
[17181155.788000] saa7133[0]: i2c xfer: < c2 80 28 >
[17181155.796000] saa7133[0]: i2c xfer: < c2 b0 01 >
[17181155.804000] saa7133[0]: i2c xfer: < c2 c0 19 >
[17181155.812000] saa7133[0]: i2c xfer: < 96 1a >
[17181155.820000] saa7133[0]: i2c xfer: < 97 =00 >
[17181155.828000] saa7133[0]: i2c xfer: < 96 1d >
[17181155.836000] saa7133[0]: i2c xfer: < 97 =c6 >
[17181155.844000] saa7133[0]: i2c xfer: < 96 1b >
[17181155.852000] saa7133[0]: i2c xfer: < 97 =14 >
[17181155.860000] tuner 1-004b: tda8290 not locked, no signal?
[17181155.860000] tuner 1-004b: adjust gain, step 1. Agc: 198, ADC stat:
0, lock
: 0
[17181155.860000] saa7133[0]: i2c xfer: < 96 28 64 >
[17181155.972000] saa7133[0]: i2c xfer: < 96 1d >
[17181155.980000] saa7133[0]: i2c xfer: < 97 =5f >
[17181155.988000] saa7133[0]: i2c xfer: < 96 1b >
[17181155.996000] saa7133[0]: i2c xfer: < 97 =12 >
[17181156.004000] tuner 1-004b: adjust gain, step 2. Agc: 95, lock: 0
[17181156.004000] saa7133[0]: i2c xfer: < c2 80 2c >
[17181156.116000] saa7133[0]: i2c xfer: < 96 1d >
[17181156.124000] saa7133[0]: i2c xfer: < 97 =00 >
[17181156.132000] saa7133[0]: i2c xfer: < 96 1b >
[17181156.140000] saa7133[0]: i2c xfer: < 97 =17 >
[17181156.148000] tuner 1-004b: adjust gain, step 3. Agc: 0
[17181156.148000] saa7133[0]: i2c xfer: < 96 05 01 >
[17181156.156000] saa7133[0]: i2c xfer: < 96 0d 27 >
[17181156.268000] saa7133[0]: i2c xfer: < 96 21 00 >
[17181156.276000] saa7133[0]: i2c xfer: < 96 0f 81 >
[17181156.284000] tuner 1-004b: tv freq set to 400.00
[17181156.284000] tuner 1-004b: setting tda8290 to system B
[17181156.284000] saa7133[0]: i2c xfer: < 96 01 02 >
[17181156.292000] saa7133[0]: i2c xfer: < 96 02 00 >
[17181156.300000] saa7133[0]: i2c xfer: < 96 00 00 >
[17181156.316000] saa7133[0]: i2c xfer: < 96 01 82 >
[17181156.324000] saa7133[0]: i2c xfer: < 96 28 14 >
[17181156.332000] saa7133[0]: i2c xfer: < 96 0f 88 >
[17181156.340000] saa7133[0]: i2c xfer: < 96 05 04 >
[17181156.348000] saa7133[0]: i2c xfer: < 96 0d 47 >
[17181156.356000] saa7133[0]: i2c xfer: < 96 21 c0 >
[17181156.388000] saa7133[0]: i2c xfer: < c2 00 32 d8 00 16 3b bb 0c 04
20 ff e0
00 39 >
[17181156.396000] saa7133[0]: i2c xfer: < c2 60 3c >
[17181156.404000] saa7133[0]: i2c xfer: < c2 a0 c0 >
[17181156.420000] saa7133[0]: i2c xfer: < c2 30 10 >
[17181156.984000] saa7133[0]: i2c xfer: < c2 50 bf >
[17181156.992000] saa7133[0]: i2c xfer: < c2 80 28 >
[17181157.000000] saa7133[0]: i2c xfer: < c2 b0 01 >
[17181157.008000] saa7133[0]: i2c xfer: < c2 c0 19 >
[17181157.016000] saa7133[0]: i2c xfer: < 96 1a >
[17181157.024000] saa7133[0]: i2c xfer: < 97 =00 >
[17181157.032000] saa7133[0]: i2c xfer: < 96 1d >
[17181157.040000] saa7133[0]: i2c xfer: < 97 =c6 >
[17181157.048000] saa7133[0]: i2c xfer: < 96 1b >
[17181157.056000] saa7133[0]: i2c xfer: < 97 =4c >
[17181157.064000] tuner 1-004b: tda8290 not locked, no signal?
[17181157.064000] tuner 1-004b: adjust gain, step 1. Agc: 198, ADC stat:
0, lock
: 0
[17181157.064000] saa7133[0]: i2c xfer: < 96 28 64 >
[17181157.176000] saa7133[0]: i2c xfer: < 96 1d >
[17181157.184000] saa7133[0]: i2c xfer: < 97 =61 >
[17181157.192000] saa7133[0]: i2c xfer: < 96 1b >
[17181157.200000] saa7133[0]: i2c xfer: < 97 =42 >
[17181157.208000] tuner 1-004b: adjust gain, step 2. Agc: 97, lock: 0
[17181157.208000] saa7133[0]: i2c xfer: < c2 80 2c >
[17181157.320000] saa7133[0]: i2c xfer: < 96 1d >
[17181157.328000] saa7133[0]: i2c xfer: < 97 =00 >
[17181157.336000] saa7133[0]: i2c xfer: < 96 1b >
[17181157.344000] saa7133[0]: i2c xfer: < 97 =4b >
[17181157.352000] tuner 1-004b: adjust gain, step 3. Agc: 0
[17181157.352000] saa7133[0]: i2c xfer: < 96 05 01 >
[17181157.360000] saa7133[0]: i2c xfer: < 96 0d 27 >
[17181157.472000] saa7133[0]: i2c xfer: < 96 21 00 >
[17181157.480000] saa7133[0]: i2c xfer: < 96 0f 81 >
[17181157.512000] saa7133[0]: registered device video0 [v4l2]
[17181157.512000] saa7133[0]: registered device vbi0
[17181157.512000] saa7133[0]: registered device radio0
[17181157.684000] saa7134 ALSA driver for DMA sound loaded
[17181157.684000] saa7133[0]/alsa: saa7133[0] at 0xe7101000 irq 12
registered as card -1
Any ideas ?
Thanks
Tom
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
