Thorsten Scherler wrote: > On Wed, 2006-10-25 at 17:20 +0200, Felipe A. Ortega García wrote: >> Hi >> >> I have the same dvb-t adapter, and I've opened it to see the PCB. There >> are 3 main chips: >> >> Zarlink ZL10353 >> Uli M9206 A1 >> MT2060f >> >> I think that the first and the third one are supported by the main >> mercurial tree. The second one is supported by this tree: >> >> http://linuxtv.org/hg/~mkrufky/megasky >> >> I've compiled this, and when I plugged the adapter nothing happened, >> something I had expected, because the USB_ID wasn't defined in any >> driver. I patched the m920x driver with a couple of defines and adding a >> USB_DEVICE definition, and when I plugged the adapter, the driver loaded >> automatically, but nothing else. Neither zl10353.ko not mt2060.ko got >> loaded, and don't know what else to do. >> > > Cheers Felipe for the feedback. Did you get the card as well in Malaga > on the OS conference (just being curious)? > > So, what you report is that you successfully patched the m920x driver > (how?) and it get loaded but nothing really happens afterward, right? > > That gives the impression that the patch may have not really worked to > well. > > Can somebody gives a tip that we may provide a driver implementation for > the card? I started to make a patch that I had planned to send in this thread for the two of you to test... Things have come up and I haven't had time to finish it.... Give me a few more days and I'll send you something to test. Please keep in mind that my patch is totally based on guesswork, using the information provided by you two in this thread. Most likely it wont work, but it will at least give you a starting point for you to base new changes from. Cheers, Michael Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb