Re: Close tzap and cannot lock frequency anymore?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Mittwoch, den 18.10.2006, 02:39 +0200 schrieb hermann pitton:
> Am Mittwoch, den 18.10.2006, 04:01 +0400 schrieb Manu Abraham:
> > hermann pitton wrote:
> > > Am Dienstag, den 17.10.2006, 02:16 +0200 schrieb hermann pitton:
> > >> Am Montag, den 16.10.2006, 22:14 +0400 schrieb Manu Abraham:
> > >>> Chun Chung Lo wrote:
> > >>>> Hi all,
> > >>>>
> > >>>> I wonder during I am capturing TS stream by using a DVB-T card (Compro
> > >>>> Videomate T300) in a Linux PC (2.6.16-18), I followed the instructions
> > >>>> shown in linuxtv-dvb-apps and run tzap and capture TS.
> > >>>>
> > >>>> Because I think all the parameters are written into the hardware of the
> > >>>> tuner, and the tzap also shown FE_HAS_LOCKED, so I think I have no need
> > >>>> to keep polling the tuner and I switched off tzap.
> > >>>>
> > >>>> But when I switched off tzap, I found that my TS capturing is stoped! (I
> > >>>> found that some TS data is missing in the captured TS file.) But when I
> > >>>> keep tzap running, no such problem occur.
> > >>>
> > >>> When you stop *zap, the default behavior of dvb-core is to switch off
> > >>> the frontend after a predefined period of time, to save power. So what
> > >>> you are seeing is the default behavior. If you want to turn OFF this
> > >>> behavior, you can use the module parameter dvb_shutdown_timeout=0 to
> > >>> dvb_core, such that this feature is disabled.
> > >>>
> > >>>
> > >>> Manu
> > >>>
> > >> Hi Manu,
> > >>
> > >> it seems there has been a reason, when Johannes asked Gerd on 2.6.12 to
> > >> take care for his own stuff ...
> > >>
> > >> That above won't work, AFAIK.
> > > 
> > > Sorry for insufficient testing.
> > > 
> > > Just timeout=0 didn't the expected. Setting a time interval prevents
> > > also the tuner_sleep and switching back to analog mode.
> > > 
> > 
> > modinfo dvb_core |grep timeout
> > 
> > parm:           dvb_shutdown_timeout:wait <shutdown_timeout> seconds
> > after close() before suspending hardware
> > parmtype:       dvb_shutdown_timeout:int
> > 
> > 
> > Manu
> > 
> 
> Thanks for the friendly reply !
> 

To make it short.

The Pinnacle 300i would be broken until now,
if not Hartmut finally took a step on the digital.

And without excellent and patient users!

Both, for analog and digital.

Hermann




_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux