Am Dienstag, den 17.10.2006, 02:16 +0200 schrieb hermann pitton: > Am Montag, den 16.10.2006, 22:14 +0400 schrieb Manu Abraham: > > Chun Chung Lo wrote: > > > Hi all, > > > > > > I wonder during I am capturing TS stream by using a DVB-T card (Compro > > > Videomate T300) in a Linux PC (2.6.16-18), I followed the instructions > > > shown in linuxtv-dvb-apps and run tzap and capture TS. > > > > > > Because I think all the parameters are written into the hardware of the > > > tuner, and the tzap also shown FE_HAS_LOCKED, so I think I have no need > > > to keep polling the tuner and I switched off tzap. > > > > > > But when I switched off tzap, I found that my TS capturing is stoped! (I > > > found that some TS data is missing in the captured TS file.) But when I > > > keep tzap running, no such problem occur. > > > > > > When you stop *zap, the default behavior of dvb-core is to switch off > > the frontend after a predefined period of time, to save power. So what > > you are seeing is the default behavior. If you want to turn OFF this > > behavior, you can use the module parameter dvb_shutdown_timeout=0 to > > dvb_core, such that this feature is disabled. > > > > > > Manu > > > > Hi Manu, > > it seems there has been a reason, when Johannes asked Gerd on 2.6.12 to > take care for his own stuff ... > > That above won't work, AFAIK. Sorry for insufficient testing. Just timeout=0 didn't the expected. Setting a time interval prevents also the tuner_sleep and switching back to analog mode. Thanks, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
