Did you manage to get the remote control to work? (Sorry about sending this twice - used the wrong email address before) On Mon, 2006-10-09 at 21:11 +1000, Mark McKenzie wrote: > Some somewhat better results this time: > > I put the card into a different machine and build the driver from Michael's > tree for it (without Chris' DVB rounding patch) and it worked first go. So > i'm looking for hardware faults in the rest of the machine now that I can > confirm the card is all good. > > Thanks for your help Michael, much appreciated. > > Gunther, i'm just collating some pictures now and should have them sent to you > for your website later this evening. > > Mark > > On Thursday 05 October 2006 00:48, Mark McKenzie wrote: > > Some more mixed news. > > > > I patched Chris' tree with the new device IDs (following your instructions) > > and tried again to just run a scan - no dice. But it certainly looks like > > you might be on to something - I saw some new messages from the driver > > shortly before > > > > the lockup: > > >>> tune to: > > >>> 205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMI > > >>>SSION_MODE_8K:GUARD_INTERVAL_1_16:HEIRARCHY_NONE > > > > DVB: demodulator offset has changed for frontend "Zarlink ZL10353 DVB-T". > > Please report tuning difficulties to linux-dvb@xxxxxxxxxxx DVB: freq: > > 205625000, div: 1451 -> 1450, offset 36166667 -> 36166667, actual: > > 241665700 -> 241832366 WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > WARNING: filter timeout pid 0x0010 > > > > >>> tune to: > > >>> 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSM > > >>>ISSION_MODE_8K:GUARD_INTERVAL_1_8:HEIRARCHY_NONE > > > > (lockup) > > > > Tomorrow i'll run it in debug mode and see if I can get more out of it. > > > > I'm in GMT+10, so I've been trying to get this working during your morning > > times. I'm on IRC at the moment but its getting late; i'll come on it again > > tomorrow. > > > > Mark > > > > On Wednesday 04 October 2006 01:52, Michael Krufky wrote: > > > Michael Krufky wrote: > > > > Here is a quick way to get things working for your device... Please > > > > follow these instructions verbatim: > > > > > > > > 1) hg clone http://linuxtv.org/hg/~mkrufky/cxusb > > > > > > > > 2) cd cxusb > > > > > > > > 3) hg export 56cb67d6c632 > FusionHDTVdual2.patch > > > > > > > > 4) cd .. > > > > > > > > 5) hg clone http://linuxtv.org/hg/~pascoe/v4l-dvb-rounding > > > > > > > > 6) cd v4l-dvb-rounding > > > > > > > > 7) hg import ../cxusb/FusionHDTVdual2.patch > > > > > > > > 8) make > > > > > > > > 9) sudo make install > > > > > > > > That should do it! > > > > > > > > Please reply-to-all after you've tested this... Chris is looking for > > > > feedback on the changes in his tree, and your testing will be helpful > > > > in evaluating whether or not this fixes your problem. > > > > > > The list dropped the cc to Chris, so I'm resending... Sorry for the > > > double email. Please make sure that both Chris and I (and the linux-dvb > > > list, of course) are cc'd when you reply to this. > > > > > > Cheers, > > > > > > Michael Krufky > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
