Pauli Borodulin wrote: > Heya! > > Manu Abraham wrote: >> [...] >> Due to large span, the relevant work could be hard to get going for many >> and could have many bugs. It is not at all for the faint hearted at this >> point of time. It would be nice to have some feedback on this. > > First of all, here's the output of "lspci -v" for my card: > --------------------------- 8< 8< 8< ------------------------------- > 0000:02:07.0 Multimedia controller: Twinhan Technology Co. Ltd: Unknown > device 4e35 (rev 01) > Subsystem: Twinhan Technology Co. Ltd: Unknown device 0008 > Flags: bus master, medium devsel, latency 64, IRQ 7 > Memory at f6000000 (32-bit, prefetchable) [size=4K] > --------------------------- 8< 8< 8< ------------------------------- Updating to a newer PCIID would help here .. latest PCIID's can be found here http://pciids.sourceforge.net/pci.ids On my system i have the PCI ID database at /usr/share/hwdata/pci.ids > The card is TwinhanDTV Cab-CI (Mantis 2033), same as > http://www.twinhan.com/product_cable_2.asp. It is the same VP-2033 > > The story: > > - Compiling went nicely, but "make install" didn't copy cu1216.ko under > /lib/modules. I had to copy it by hand. > > - Loading the modules worked fine. Output of dmesg after loading the modules: > > --------------------------- 8< 8< 8< ------------------------------- > ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> > IRQ 7 > Mantis Rev 1, irq: 7, latency: 64 > memory: 0xf6000000, mmio: 0xe0816000 > get_mac_address (1): MAC Address=[ff:ff:ff:ff:ff:ff] > get_subvendor_id (1): Sub Vendor ID=[0x1822] > get_subdevice_id (1): Sub Device ID=[0x0008] > mantis_alloc_buffers (1): DMA=0x1e410000 cpu=0xde410000 size=65536 > mantis_alloc_buffers (1): RISC=0xcb27000 cpu=0xccb27000 size=1000 > DVB: registering new adapter (Mantis dvb adapter). > mantis_frontend_init (1): Probing for CU1216 (DVB-C) > mantis_frontend_init (1): found Philips CU1216 DVB-C frontend @ 0x0c > mantis_frontend_init (1): Mantis DVB-C Philips CU1216 frontend attach success > DVB: registering frontend 0 (Philips CU1216 DVB-C)... > --------------------------- 8< 8< 8< ------------------------------- > > - I get no picture at all. Looks like it doesn't even see the signal, > because if I plug and unplug the RF cable, I see no difference in czap output: > Ok, i will need to check as to why. > --------------------------- 8< 8< 8< ------------------------------- > boro@vdr:/var/lib/video$ czap "YLE TV1" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > 1 YLE TV1:418000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_128:512:650:17 > 1 YLE TV1: f 418000000, s 6900000, i 2, fec 0, qam 4, v 0x200, a 0x28a QAM4 when you have asked it to use QAM128, that 's one bug in there. > status 00 | signal 0062 | snr 0258 | ber 00000000 | unc 00000000 | > status 00 | signal 0062 | snr 0258 | ber 00000000 | unc 00000000 | > [... more exactly identical lines ...] > --------------------------- 8< 8< 8< ------------------------------- > > After running czap, I got the following out in dmesg: > > --------------------------- 8< 8< 8< ------------------------------- > mantis start feed & dma > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > [... even more exactly identical lines ...] > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > [cu1216_set_parameters]:frequency = 418000000 , symbol = 6900000 , qam = 4 . > mantis stop feed and dma > --------------------------- 8< 8< 8< ------------------------------- > > Also running "dvbsnoop -s pidscan" produces no output. I have another DVB-C > card in the system at the same time (Terratec Cinergy 1200 DVB-C) and it > works fine with my setup. > > DVB modules (and other relevant ones) that I had loaded (my system also has > DXR3 card, em8300 is the module for it): > > --------------------------- 8< 8< 8< ------------------------------- > mantis 29224 0 > cu1216 9388 1 mantis > mb86a16 20416 1 mantis > stv0299 10952 1 mantis > dvb_core 79688 2 mantis,stv0299 > dvb_pll 11492 1 mantis > i2c_algo_bit 9544 1 em8300 > firmware_class 10432 1 em8300 > i2c_i801 8844 0 > i2c_core 21648 7 > mantis,cu1216,mb86a16,stv0299,adv717x,i2c_algo_bit,i2c_i801 > --------------------------- 8< 8< 8< ------------------------------- > > > Br, Thanks for the feedback. Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
