Hi all, I am now using a STB (under development) which its hardware configuration is: SAA7134 + TDA10046A + TD1316 When I capture the TS stream (which is stream out by a DVB-T modulator), and compare the file with the original one, I found tones of NULL packets (which its header is 0x47 0x1F, 0xFF 0x10, and remains are 0x00 ... Until the end of a TS packets, 188bytes). The captured TS is corrupted in a random level, sometimes seriously, sometimes a bit. I found these null packets wasted lots of PCI bandwidth and, may these cause the above error? And where are the TS null packets come from? Please help. Thanks. Best regards, Lo Chun Chung This message (including any attachments) is for the named addressee(s)'s use only. It may contain sensitive, confidential, private proprietary or legally privileged information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender. Any use, disclosure, copying, or distribution of this message and/or any attachments is strictly prohibited. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
