On Sun, 24 Sep 2006, Roland Mieslinger wrote: > > > AFAIK this is a budget device which does not require any (binary) firmware. > > > > Most likely this device is based on Cypress FX2 and then it will most > > likely need a Firmware for it. > > yes it is FX2 based, but the usbsnoop done with windows gives no > evidence of an firmware download. OK. It might be hidden: when a firmare download takes place the device re-enumerates (disconnect and reconnect). When it re-enumerates with the same USB IDs usbsnoop will restart the log-file from the beginning and deletes the firmware download. Sometimes you can see a difference, by looking with lsusb -v before and after downloading the firmware (or usbview on Windows). If you are successfully using the device in Linux (after a replug) it will need probably no firmware. regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
