I've tried with the new patches 1) module loading works fine now 2) I cannot tune or scan anything 3) make unload works fine Sep 20 21:43:46 thinkpad kernel: usb 4-4: new high speed USB device using ehci_hcd and address 3 Sep 20 21:43:46 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice Sep 20 21:43:46 thinkpad kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware Sep 20 21:43:46 thinkpad kernel: dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-02.fw' Sep 20 21:43:46 thinkpad kernel: usbcore: registered new driver dvb_usb_nova_t_usb2 Sep 20 21:43:46 thinkpad kernel: usb 4-4: USB disconnect, address 3 Sep 20 21:43:46 thinkpad kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Sep 20 21:43:48 thinkpad kernel: usb 4-4: new high speed USB device using ehci_hcd and address 4 Sep 20 21:43:48 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice Sep 20 21:43:48 thinkpad kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state. Sep 20 21:43:48 thinkpad kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Sep 20 21:43:48 thinkpad kernel: DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2). Sep 20 21:43:48 thinkpad kernel: dvb-usb: MAC address: 00:0d:fe:04:8b:40 Sep 20 21:43:48 thinkpad kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)... Sep 20 21:43:48 thinkpad kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Sep 20 21:43:48 thinkpad kernel: dvb-usb: schedule remote query interval to 100 msecs. Sep 20 21:43:48 thinkpad kernel: dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. [andrea@thinkpad ~]$ scan -v /usr/share/dvb/dvb-t/uk-CrystalPalace scanning /usr/share/dvb/dvb-t/uk-CrystalPalace using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 505833333 0 3 9 1 0 0 0 initial transponder 554000000 0 2 1 0 1 0 0
tune to: 505833333:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02
WARNING: >>> tuning failed!!!
tune to: 505833333:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
(tuning failed)
tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02 tuning status == 0x02
WARNING: >>> tuning failed!!!
tune to: 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE tuning status == 0x02 tuning status == 0x06 tuning status == 0x06 tuning status == 0x06 tuning status == 0x02 tuning status == 0x06 tuning status == 0x06 tuning status == 0x02 tuning status == 0x06 tuning status == 0x06
WARNING: >>> tuning failed!!!
tune to: 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
(tuning failed)
tuning status == 0x06 tuning status == 0x06 tuning status == 0x04 tuning status == 0x04 tuning status == 0x04 tuning status == 0x06 tuning status == 0x06 tuning status == 0x04 tuning status == 0x04 tuning status == 0x06
WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. and this is the scan file I'm using # Crystal Palace # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 505833333 8MHz 3/4 NONE QAM16 2k 1/32 NONE # This is for HDTV T 554000000 8MHz 2/3 1/2 QPSK 8k 1/32 NONE And this is tzap andrea@thinkpad ~]$ tzap "BBC ONE" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/home/andrea/.tzap/channels.conf' tuning to 505833330 Hz video pid 0x0258, audio pid 0x0259 status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | Everything worked fine till last weekend. anything I'm missing? On 9/19/06, Patrick Boettcher <patrick.boettcher@xxxxxxx> wrote:
Hi, Yes, it is a bug: I will commit a fix tomorrow. No time left today. (should be != NULL in dibusb-common.c:233 and 234) Patrick.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
