Hi James, Am Montag, den 11.09.2006, 22:13 +0100 schrieb James Fidell: > Hartmut Hackmann wrote: > [...] > > > A last hint. When i investigated the tuner module of you card, i noticed > > that it tunes very slowly. When you notice that several scans give > > different > > results, the cause can easily be that the tuner can receive all signals, > > but > > a timeout of the scan routine prevents this. > > I'll check that out. > > If I may return to a comment in one of your earlier emails, you wrote: > > > The tda10046 does not correct for frequently reported offsets of > > 167000Hz, which seem to be mostly negative in the UK. So in case you > > miss a multiplex, you might try to "dvbscan" again with such offsets. guess that was me. > Is this likely to be the reason that the DVB-T200 card gives dvbscan > errors like: > > >>> tune to: > 802166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!!>>> tune to: > 802166670:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!!retrying with f=530000000 > >>> tune to: > 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!!>>> tune to: > 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > (tuning failed) > WARNING: >>> tuning failed!!!retrying with f=634166670 > > where the Hauppauge card finds more channels? If it is not caused by a too early timeout, likely this could be the case. Think there is no database of all the transmitters yet. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
