Hi, I just debugged a little for the Nova-T 500. I found some things, but not all. All I know, the repository dib0700 cannot work and I have no quick fix. So all I can ask for is some patience. Patrick. On Tue, 12 Sep 2006, Jose Alberto Reguero wrote: > El Martes, 12 de Septiembre de 2006 14:36, escribió: > > Attached the firmware. > > > > Please report success or not to the list. > > > > Patrick. > > > > Relevant parts of dmesg: > > dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to > load a firmware > dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' > dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. > DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). > DVB: registering frontend 0 (DiBcom 3000MC/P)... > MT2060: successfully identified (IF1 = 1220) > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. > DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). > DVB: registering frontend 1 (DiBcom 3000MC/P)... > MT2060: successfully identified (IF1 = 1220) > dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and > connected. > usbcore: registered new driver dvb_usb_dib0700 > > But not good rsults with tzap: > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.tzap/channels.conf' > tuning to 770000000 Hz > video pid 0x0065, audio pid 0x0067 > status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00001125 | > status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | > status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | > status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.tzap/channels.conf' > tuning to 850000000 Hz > video pid 0x05dd, audio pid 0x05de > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000019 | > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > reading channels from file '/root/.tzap/channels.conf' > tuning to 858000000 Hz > video pid 0x012d, audio pid 0x012f > status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | > status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 000000c9 | FE_HAS_LOCK > status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00000cff | FE_HAS_LOCK > status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK > status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK > > Thanks. > Jose Alberto >
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
