El Martes, 12 de Septiembre de 2006 14:36, escribió: > Attached the firmware. > > Please report success or not to the list. > > Patrick. > Relevant parts of dmesg: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). DVB: registering frontend 0 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 = 1220) dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T). DVB: registering frontend 1 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. usbcore: registered new driver dvb_usb_dib0700 But not good rsults with tzap: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 770000000 Hz video pid 0x0065, audio pid 0x0067 status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00001125 | status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 | using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 850000000 Hz video pid 0x05dd, audio pid 0x05de status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000019 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 858000000 Hz video pid 0x012d, audio pid 0x012f status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 | status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 000000c9 | FE_HAS_LOCK status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00000cff | FE_HAS_LOCK status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK Thanks. Jose Alberto _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
