Lincoln Dale wrote: > my system consists of 3 DVB-T single-tuner cards & 1 analog tuner. > specifically: > > 1 x DvICO Fusion HDTV DVB-T1 (OEM version of T Plus; > requires: cx88, cx2388x, cx88-dvb, Zarlink MT352 frontend > > 1 x Twinham VisionPlus (bt878 > requires: bt878, dvb-bt8xx, DST frontend > > 1 x AverMedia AV-771 > requires: bt878, dvb-bt8xx, Zarlink MT352 frontend > > 1 x Hauppage WinTV (analog; bt848-based, requires bttv) > > > due to the newness of the motherboard, i need to run a 'recent' (2.6.18rc5) > kernel. previously i used to run a 2.6.13 kernels without with whatever the > stock dvb/v4l sync was as of 2.6.13. (no need for tip-of-tree dvb). > > however, as of 2.6.18-rc5 kernel, dvb no longer functions correctly, so i > need to run with tip-of-tree dvb. I am happy to see that you and Andrew were able to determine that the problem with dvb_attach was due to an old version of module_init_tools, however, I am also very interested to hear about what was wrong with the vanilla 2.6.18-rc kernel, that lead you to install the newer modules from linuxtv.org . Richard Dale speaks of a problem that he had in 2.6.18-rc6 with his DViCO card... http://linuxtv.org/pipermail/linux-dvb/2006-September/012639.html ...Is this the same problem that you had experienced? If not, could you provide some more information? I tried 2.6.18-rc6 on my hardware last night and saw no such problems.... but if this is indeed a problem in 2.6.18, I'd like to find it right away. Thanks, Michael Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
