I use this software http://www.doom9.org/index.html?/DigiTV/projectx-fullguide.htm to convert .ts to mpeg I hope that helps. Phil On Sun, 2006-08-20 at 12:00 +0200, linux-dvb-request@xxxxxxxxxxx wrote: > Send linux-dvb mailing list submissions to > linux-dvb@xxxxxxxxxxx > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > or, via email, send a message with subject or body 'help' to > linux-dvb-request@xxxxxxxxxxx > > You can reach the person managing the list at > linux-dvb-owner@xxxxxxxxxxx > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of linux-dvb digest..." > > > Today's Topics: > > 1. MPEG from stream file (Nick Fedchik) > 2. Hauppauge WinTV Nova-t USB Stick (Jukka-Pekka V??r?m?ki) > 3. Re: Remote control only works after playing a channnel > (Thorsten Pferdek?mper) > 4. Re: budget-ci patches (was: technotrend C1500 -bundled > remote...) (Darren Salt) > 5. Re: DiB3000MC rewritten and MT2060 is ready to go into main > (Patrick Boettcher) > 6. Re: Club 3D zap250mini (Patrick Boettcher) > 7. SAA7146 (KNC ONE DVB-C): ber values reliable? (Thomas B?rkel) > 8. [PATCH] cx88: IR Support for Winfast DTV1000 T (Adam Zammit) > 9. Re: RE: FusionHDTV Dual Digital zl10353 / dee1601 > tuning (Luke Rosenthal) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 19 Aug 2006 14:57:15 +0300 > From: Nick Fedchik <nick@xxxxxxxxxxxxxx> > Subject: MPEG from stream file > To: linux-dvb@xxxxxxxxxxx > Message-ID: <200608191457.16024.nick@xxxxxxxxxxxxxx> > Content-Type: text/plain; charset="utf-8" > > Hello, peoples! I need some help. > > First I grab the stream from DVB card > #gnutv -channels channels.conf -out file CNN.ts -timeout 60 "CNN" > > Now how can I extract MPEG from CNN.ts ? > I tried to do it using Mplayer, but it fail... > > $ /usr/local/bin/mplayer -vo xvidix -ao null cnn.ts > MPlayer 1.0pre8-4.0.3 (C) 2000-2006 MPlayer Team > CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (Family: 6, Model: 14, Stepping: 8) > CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 > Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 > > Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied > Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. > > Playing cnn.ts. > TS file format detected. > DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -2, > PROBING UP TO 2000000, PROG: 0 > VIDEO MPEG2(pid=7041)AUDIO MPA(pid=7042) NO SUBS (yet)! PROGRAM N. 7040 > Opened TS demuxer, audio: 50(pid 7042), video: 10000002(pid 7041)...POS=3008, PROBE=2000000 > parse_es: could not sync video stream! > MPEG: FATAL: EOF while searching for sequence header. > Video: Cannot read properties. > ========================================================================== > Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 > ADecoder init failed :( > ADecoder init failed :( > Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders > AUDIO: 16000 Hz, 2 ch, s16le, 96.0 kbit/18.75% (ratio: 12000->64000) > Selected audio codec: [ffmp2] afm: ffmpeg (FFmpeg MPEG layer-1 and layer-2 audio decoder) > ========================================================================== > AO: [null] 16000Hz 2ch s16le (2 bytes per sample) > Video: no video > Starting playback... > A: -0.0 (unknown) of 1693.5 (28:13.4) ??,?% > > Exiting... (End of file) > $ > > Can somebody show me a good sample? > > -- > Best regards, Nick Fedchik > > > > ------------------------------ > > Message: 2 > Date: Sat, 19 Aug 2006 12:57:40 +0300 > From: Jukka-Pekka V??r?m?ki <jukkapekkavaaramaki@xxxxxxxxx> > Subject: Hauppauge WinTV Nova-t USB Stick > To: linux-dvb@xxxxxxxxxxx > Message-ID: <44E6E094.6040304@xxxxxxxxx> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi! > When will the Hauppauge WinTV Nova-t USB Stick drivers be released? > Patrick Boettcher wrote a while ago that he was working on them and I > got the impression they were nearly finished. Any ideas? > Jukka V. > > > > ------------------------------ > > Message: 3 > Date: Sat, 19 Aug 2006 14:57:56 +0200 > From: Thorsten Pferdek?mper > <thorsten-mailbox@xxxxxxxxxxxxxxxxxxxxxxxxx> > Subject: Re: Remote control only works after playing a > channnel > To: linux-dvb@xxxxxxxxxxx > Message-ID: > <200608191457.57007.thorsten-mailbox@xxxxxxxxxxxxxxxxxxxxxxxxx> > Content-Type: text/plain; charset="iso-8859-1" > > On Tuesday 15 August 2006 07:57, Thorsten Pferdekmper wrote: > > I have a weird problem with my remote control. It only works if I either > > play a channel before (e.g. mplayer dvb://...) or if I remove all the cx88 > > modules and install cx88-dvb again. > > I had a look at this using the parameter ir_debug=1 with cx88xx, so I am > > pretty sure that this is not a problem with lircd or something else. > > > > Ok, this was the short version. Here is the full information. > > The DVB card is a Hauppauge WinTV Nova-S-Plus > > Kernel 2.6.16, compiled from source > > Debian unstable > > v4l-dvb package from 5.5.2006, with the nova-s-plus patch installed > > > > [...] > > > > Hi, > I have solved the problem by getting the newest v4l-dvb from mercury. > Regards, > Thorsten > > > > ------------------------------ > > Message: 4 > Date: Sat, 19 Aug 2006 18:41:06 +0100 > From: Darren Salt <linux@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > Subject: Re: budget-ci patches (was: technotrend C1500 > -bundled remote...) > To: linux-dvb@xxxxxxxxxxx > Message-ID: <4E58F391A8%linux@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > Content-Type: text/plain; charset=us-ascii > > I demand that Jussi Kukkonen may or may not have written... > > > Lainaus Darren Salt <linux@xxxxxxxxxxxxxxxxxxxxxxxxxxx>: > >> The budget-ci patches need somebody to maintain them and get them included > >> in the main repository. There is a little work to be done on them, but I > >> can only compile-test these days. > > >> If you want to take them on, that'd be good... > > > I'm not at all sure my skills are up to that, but... Would you, or anyone, > > mind explaining the situation to a v4l-dvb (and > > kernel-module-dev-in-general) newbie? > > Well... they've been posted here and some of them were almost included once. > > > Is there something in the design that has prevented them from being > > included or do they just need the testing? > > Testing and, for one of the patches, debugging. I think that the repeat, > device name truncation avoidance, EVIOCGPHYS and kzalloc patches can go > straight in, modulo possible bit-rot; I'm fairly sure that the ir-common > usage patch can go in (for one thing, it provides the correct default keymap > for the R808 remote control which was supplied with some Nova-Ts). However, > the shutdown patch needs some debugging. > > > What kind of a timeline/process is typical or expected here? > > It seems to be very variable. :-| > > -- > | Darren Salt | linux or ds at | nr. Ashington, | Toon > | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army > | <URL:http://www.youmustbejoking.demon.co.uk/> (PGP 2.6, GPG keys) > > Growing old is mandatory; growing up is optional! > > > > ------------------------------ > > Message: 5 > Date: Sat, 19 Aug 2006 21:15:26 +0200 (CEST) > From: Patrick Boettcher <patrick.boettcher@xxxxxxx> > Subject: Re: DiB3000MC rewritten and MT2060 is ready to go > into main > To: matthieu castet <castet.matthieu@xxxxxxx> > Cc: linux-dvb@xxxxxxxxxxx > Message-ID: <Pine.LNX.4.64.0608192114150.6507@xxxxxxxxxxx> > Content-Type: TEXT/PLAIN; charset=US-ASCII > > Hi Matthieu, > > I added something to my repository which should fix it: > > Can you give it a try: > http://linuxtv.org/hg/~pb/v4l-dvb > > Thanks for finding the problem, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > > > On Fri, 18 Aug 2006, matthieu castet wrote: > > > Hi, > > Patrick Boettcher wrote: > > > Hi, > > > > > > On Thu, 17 Aug 2006, matthieu castet wrote: > > > > > > > > >Are you running on USB2.0? > > > > > > > > > >No usb1.1 > > > > > > > > > >On usb2.0 it seems to work (but the configuration is a bit different). > > > > >Is there a way to check if the usb bandwidht don't overflow because of > > > > >bad > > > > >filtering ? > > > > > > > > > So OK, it is definitely only the PID filter functionality somewhere. It can > > > be the dib3000mc or the use of the interface. > > > > > > It will only be a small fix and there is only a few people having only > > > USB1.1. It is save to merge it into mainline and then send a patch for > > > fixing later. > > > > > > How are you coding abilities? Can you check if dib3000mc_pid_parse is called > > > with onoff 1 and if the bit is set correcly by reading it back. > > > > > Yes it is set correctly, but look what you do in dib3000mc_set_output_mode : > > > > case OUTMODE_MPEG2_FIFO: // e.g. USB feeding > > elecout = 3; > > /*ADDR @ 206 : > > P_smo_error_discard [1;6:6] = 0 > > P_smo_rs_discard [1;5:5] = 0 > > P_smo_pid_parse [1;4:4] = 0 > > ^^^^^^^^ ooppps we don't whant > > to touch this one : it is set by dib3000mc_pid_parse. > > P_smo_fifo_flush [1;3:3] = 0 > > P_smo_mode [2;2:1] = 11 > > P_smo_ovf_prot [1;0:0] = 0 > > */ > > smo_reg = (0 << 6) | (0 << 5) | (0 << 4) | (0 > > << 3) |(3 << 1) | 0; > > fifo_threshold = 512; > > outmode = 5; > > break; > > > > If I put smo_reg = (0 << 6) | (0 << 5) | (1 << 4) | (0 << 3) |(3 << 1) | 0; > > it works :) > > > > There is 2 solutions to solve the problem : > > - smo_reg is only set at init time > > - we don't touch bit 4 in dib3000mc_set_output_mode > > > > Matthieu > > > > > > ------------------------------ > > Message: 6 > Date: Sat, 19 Aug 2006 21:16:53 +0200 (CEST) > From: Patrick Boettcher <patrick.boettcher@xxxxxxx> > Subject: Re: Club 3D zap250mini > To: Jochen Issing <jochen@xxxxxxxxxxxxxxxx> > Cc: linux-dvb@xxxxxxxxxxx > Message-ID: <Pine.LNX.4.64.0608192115360.6507@xxxxxxxxxxx> > Content-Type: TEXT/PLAIN; charset=US-ASCII > > Hi Jochen, > > I applied and committed your patch with a slight modification to my > repository. I will send the pull-request to Mauro after your confirmation. > > thanks for the patch, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > > On Sun, 13 Aug 2006, Jochen Issing wrote: > > After some structural changes, here comes the updated patch for the Club 3D > > zap250mini USB dvb device. > > > > If there are still some things incorrect, please let me know and I will try to > > correct it. > > > > Cheers, > > > > jochen > > > > > ------------------------------ > > Message: 7 > Date: Sun, 20 Aug 2006 00:55:24 +0200 > From: Thomas B?rkel <thomas@xxxxxxxxxx> > Subject: SAA7146 (KNC ONE DVB-C): ber values reliable? > To: linux-dvb <linux-dvb@xxxxxxxxxxx> > Message-ID: <44E796DC.3080200@xxxxxxxxxx> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > HI! > > I am using KNC ONE DVB-C (budget_av) with kernel 2.6.16. > > Whatever I do (different cables, changing amplification, switching > channels), czap always reports a ber of 195000. > > Recently I got a second card and it's the same there. Only on one > occasion, I suddenly had a ber of 50 on the new card. After reboot, it > was back to 195000. > > Now I installed recent (1-2 weeks old) development version of the > drivers and now one card has again always a ber of 195000 and the other > one has always 194ef2. > > My question is: Is the ber reliable from this card? > > Thanks! > > Thomas > > > > > ------------------------------ > > Message: 8 > Date: Sun, 20 Aug 2006 11:24:45 +1000 > From: Adam Zammit <adam@xxxxxxxx> > Subject: [PATCH] cx88: IR Support for Winfast DTV1000 T > To: linux-dvb@xxxxxxxxxxx > Message-ID: <44E7B9DD.90807@xxxxxxxx> > Content-Type: text/plain; charset="iso-8859-1" > > Hello, > > Can someone please verify that this patch works for them. Included is > and update to the keys for the Y04G0004 controller that came in the box > with my Winfast DTV1000 T (purchased in Australia). The patch was > written against 2.6.17.8 vanilla. > > Regards, > Adam Zammit > > > --- > > -------------- next part -------------- > --- a/linux/drivers/media/common/ir-keymaps.c 2006-08-07 14:18:54.000000000 +1000 > +++ b/linux/drivers/media/common/ir-keymaps.c 2006-08-17 01:04:28.000000000 +1000 > @@ -1285,7 +1285,25 @@ > [ 0x23 ] = KEY_PLAYPAUSE, > [ 0x24 ] = KEY_NEXT, > [ 0x26 ] = KEY_STOP, > - [ 0x27 ] = KEY_RECORD > + [ 0x27 ] = KEY_RECORD, > + > + /* Added by Adam for Y04G0004 Control */ > + [ 0x36 ] = KEY_TV, > + [ 0x37 ] = KEY_RADIO, > + [ 0x38 ] = KEY_DVD, > + [ 0x29 ] = KEY_EXIT, > + [ 0x30 ] = KEY_CHANNEL, > + [ 0x2f ] = KEY_MENU, > + [ 0x31 ] = KEY_EPG, > + [ 0x32 ] = KEY_CHANNEL, > + [ 0x33 ] = KEY_LANGUAGE, > + [ 0x1e ] = KEY_VIDEO, > + [ 0x1b ] = KEY_AUDIO, > + [ 0x16 ] = KEY_SUBTITLE, > + [ 0x11 ] = KEY_BACK, > + [ 0x28 ] = KEY_SHUFFLE, > + [ 0x25 ] = KEY_F23, > + [ 0x2a ] = KEY_MODE > }; > > EXPORT_SYMBOL_GPL(ir_codes_winfast); > --- a/linux/drivers/media/video/cx88/cx88-cards.c 2006-08-07 14:18:54.000000000 +1000 > +++ b/linux/drivers/media/video/cx88/cx88-cards.c 2006-08-17 01:05:13.000000000 +1000 > @@ -865,6 +865,10 @@ > .input = {{ > .type = CX88_VMUX_DVB, > .vmux = 0, > + .gpio0 = 0x00F5e700, > + .gpio1 = 0x00003004, > + .gpio2 = 0x00F5e700, > + .gpio3 = 0x02000000, > }}, > .dvb = 1, > }, > --- a/linux/drivers/media/video/cx88/cx88-input.c 2006-08-07 14:18:54.000000000 +1000 > +++ b/linux/drivers/media/video/cx88/cx88-input.c 2006-08-17 01:04:56.000000000 +1000 > @@ -173,6 +173,7 @@ > ir->sampling = 1; > break; > case CX88_BOARD_WINFAST2000XP_EXPERT: > + case CX88_BOARD_WINFAST_DTV1000: > ir_codes = ir_codes_winfast; > ir->gpio_addr = MO_GP0_IO; > ir->mask_keycode = 0x8f8; > > ------------------------------ > > Message: 9 > Date: Sun, 20 Aug 2006 19:46:57 +1000 (EST) > From: "Luke Rosenthal" <linux-dvb@xxxxxxxxxxxxxxx> > Subject: Re: RE: FusionHDTV Dual Digital zl10353 / dee1601 > tuning > To: linux-dvb@xxxxxxxxxxx > Message-ID: <1180.192.168.2.50.1156067217.squirrel@xxxxxxxxxxxxx> > Content-Type: text/plain;charset=iso-8859-1 > > >> I'm having a few probs compiling on FC5: > >> > >> hg clone http://linuxtv.org/hg/v4l-dvb/ cd v4l-dvb make > >> > >> I get the following errors: > >> > >> /tmp/v4l-dvb/v4l/dvb_net.c: In function 'wq_set_multicast_list': > >> /tmp/v4l-dvb/v4l/dvb_net.c:1141: error: 'struct net_device' has no > >> member named 'xmit_lock' /tmp/v4l-dvb/v4l/dvb_net.c:1170: error: 'struct > >> net_device' has no member named 'xmit_lock' > >> > >> Compiling against 2.6.17-1.2174_FC5, I have the following kernel > >> packages installed: > >> > >> kernel-2.6.17-1.2145_FC5.i686.rpm kernel-2.6.17-1.2174_FC5.i686.rpm > >> kernel-devel-2.6.17-1.2174_FC5.i686.rpm > >> > >> Am I doing something wrong? I have been able to compile the v4l-dvb > >> tree before as recently as a week ago (altho that was against > >> 2.6.17-1.2145, I think) > > > > [snip, snip] > > > > IIRC, the FC5 2.6.17 kernels are actually based on 2.6.18, so this > > problem can be fixed by doing small changes to the dvb_net.c file. > > > > Find the function wq_set_multicast_list and change the two occurrences of > > > > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) > > > > to > > > > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) > > > > so that xmit_lock won't be used. Works for me. > > Perfect, this worked a treat - I can confirm the v4l-dvb tree from > linuxtv.org now compiles against kernel-2.6.17-1.2174_FC5 when the above > tweaks are made. > > Thanks very much!! > > Luke. > > > > > > ------------------------------ > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > End of linux-dvb Digest, Vol 19, Issue 53 > ***************************************** > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
