Hi On 7/30/06, D. Sen <dsen@xxxxxxxx> wrote:
Thanks Markus. Reducing the frequencies by 0.5 MHz worked. I can now see the digital channels in Sydney, Australia. Have to figure out how to get the analogue signals.
ok this means that it's a general issue, I'll fix the driver within the next few days... Markus
Cheers, DS Markus Rechberger wrote: > Hi, > > try to decrease the frequencies in your list. > Try to decrease it by 0.5 MHz ... another guy from Berlin also > reported such an issue, since it worked very well for me in another > German city I didn't want to change anything... > So for example: >> initial transponder 543500000 1 3 9 3 1 1 0 > should be: > ................................. 543000000 ..... (also try other > steps if it doesn't work out) > > Markus > > On 7/29/06, D. Sen <dsen@xxxxxxxx> wrote: >> I am not having any luck scanning. Here are my outputs of running scan >> and the kernel logs. Running Kernel 2.6.13: >> >> Anyhelp would appreciated. >> >> Thanks, >> DS >> >> #./scan dvb-t/au-Sydney_Kings_Cross >> scanning dvb-t/au-Sydney_Kings_Cross >> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >> initial transponder 543500000 1 3 9 3 1 1 0 >> initial transponder 669500000 1 2 9 3 1 2 0 >> initial transponder 564500000 1 3 9 3 1 1 0 >> initial transponder 648500000 1 3 9 3 1 1 0 >> initial transponder 571500000 1 2 9 3 1 2 0 >> >>> tune to: >> 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> >> (tuning failed) >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >> >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >> >> >> (tuning failed) >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> >> (tuning failed) >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 648500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 648500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> >> >> (tuning failed) >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >> >> WARNING: >>> tuning failed!!! >> >>> tune to: >> 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >> >> >> (tuning failed) >> WARNING: >>> tuning failed!!! >> ERROR: initial tuning failed >> dumping lists (0 services) >> Done. >> >> >> >> >> Jul 30 04:57:17 localhost kernel: usb 4-4: new high speed USB device >> using ehci_hcd and address 3 >> Jul 30 04:57:18 localhost kernel: em28xx new video device (eb1a:2881): >> interface 0, class 255 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate settings: 8 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 0, max >> size= 0 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 1, max >> size= 0 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 2, max >> size= 1448 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 3, max >> size= 2048 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 4, max >> size= 2304 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 5, max >> size= 2580 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 6, max >> size= 2892 >> Jul 30 04:57:18 localhost kernel: em28xx #0: Alternate setting 7, max >> size= 3072 >> Jul 30 04:57:18 localhost kernel: tuner 0-0061: chip found @ 0xc2 >> (em28xx #0) >> Jul 30 04:57:18 localhost kernel: attach inform: detected I2C address c2 >> Jul 30 04:57:18 localhost kernel: xc3028-tuner.c: selected videostandard >> PAL-B/G >> Jul 30 04:57:18 localhost kernel: xc3028-tuner.c: ANALOG Mode! >> Jul 30 04:57:18 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em28xx-i2c.c: em28xx_gpio_write >> Jul 30 04:57:19 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em28xx-i2c.c: em28xx_gpio_write >> Jul 30 04:57:20 localhost kernel: xc3028-tuner.c: Firmware uploaded >> Jul 30 04:57:21 localhost kernel: attach_inform: tvp5150 detected. >> Jul 30 04:57:21 localhost kernel: attach_inform: eeprom detected. >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 >> 1a eb 81 28 58 12 5c 00 6a 20 6a 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 10: 00 00 04 57 >> 64 57 00 00 60 f4 00 00 02 02 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 20: 56 00 01 00 >> 00 00 02 00 b8 00 00 00 5b 1e 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 30: 00 00 20 40 >> 20 80 02 20 10 02 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 40: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 50: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 60: 00 00 00 00 >> 00 00 00 00 00 00 20 03 55 00 53 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 70: 42 00 20 00 >> 32 00 38 00 38 00 31 00 20 00 56 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 80: 69 00 64 00 >> 65 00 6f 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom 90: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom a0: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom b0: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom c0: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom d0: 00 00 00 00 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom e0: 5a 00 55 aa >> 79 55 54 03 00 17 98 01 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: em28xx #0: i2c eeprom f0: 0c 00 00 01 >> 00 00 00 00 00 00 00 00 00 00 00 00 >> Jul 30 04:57:21 localhost kernel: EEPROM ID= 0x9567eb1a >> Jul 30 04:57:21 localhost kernel: Vendor/Product ID= eb1a:2881 >> Jul 30 04:57:21 localhost kernel: AC97 audio (5 sample rates) >> Jul 30 04:57:21 localhost kernel: USB Remote wakeup capable >> Jul 30 04:57:21 localhost kernel: 500mA max power >> Jul 30 04:57:21 localhost kernel: Table at 0x04, strings=0x206a, 0x006a, >> 0x0000 >> Jul 30 04:57:21 localhost kernel: tvp5150 0-005c: tvp5150am1 detected. >> Jul 30 04:57:26 localhost kernel: em28xx #0: V4L2 VBI device registered >> as /dev/vbi0 >> Jul 30 04:57:26 localhost kernel: em28xx #0: V4L2 device registered as >> /dev/video0 >> Jul 30 04:57:26 localhost kernel: em28xx-video.c: setting DVB lock >> Jul 30 04:57:26 localhost kernel: em2880-dvb.c: DVB Init >> Jul 30 04:57:26 localhost kernel: em2880-dvb.c: VIDIOC_S_MODE >> Jul 30 04:57:26 localhost kernel: xc3028-tuner.c: DIGITAL MODE! >> Jul 30 04:57:26 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em28xx-i2c.c: em28xx_gpio_write >> Jul 30 04:57:27 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em28xx-i2c.c: em28xx_gpio_write >> Jul 30 04:57:28 localhost kernel: xc3028-tuner.c: Firmware uploaded >> Jul 30 04:57:28 localhost kernel: xc3028-tuner.c: sending extra call for >> DVB-T >> Jul 30 04:57:28 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em28xx-i2c.c: em28xx_gpio_write >> Jul 30 04:57:28 localhost kernel: zl10353: device found! >> Jul 30 04:57:28 localhost kernel: >> /tmp/v4l-dvb-42b9b4b5a42e/v4l/em2880-dvb.c: em2880_zl10353_init >> Jul 30 04:57:29 localhost kernel: DVB: registering new adapter (em2880 >> DVB-T). >> Jul 30 04:57:29 localhost kernel: DVB: registering frontend 0 (Zarlink >> ZL10353 DVB-T)... >> Jul 30 04:57:29 localhost kernel: em28xx-video.c: releasing DVB lock >> Jul 30 04:57:29 localhost kernel: em28xx #0: Found Pinnacle Hybrid Pro >> Jul 30 04:57:29 localhost kernel: em28xx audio device (eb1a:2881): >> interface 1, class 1 >> Jul 30 04:57:29 localhost kernel: em28xx audio device (eb1a:2881): >> interface 2, class 1 >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> > >
-- Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
