Hi Mark, No luck with 2.6.18-rc2... got a kernel panic Now, I'm in the wrong list... Uncompressing Linux... Ok, booting the kernel Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Steps taken: 1) download linux-2.6.17 and patch-2.6.18-rc2 2) Decompress, move the patch to the linux-2.6.17 directory 3) patch -p1 < patch-2.6.17-rc2 4) make menuconfig ... accepted all defaults 5) make 6) make modules_install 7) make install Distro is FC5. If I've missed something stupid, I'm happy to give it another go and have another crack at the dvico card. Should I send this info somewhere else? I'm quite happy just to wait for the stable 2.6.18 to come out and try my card then... Thanks for you help. Damien. -----Original Message----- From: Mark [mailto:test@xxxxxxxxxxxxxxxxx] Sent: Saturday, 29 July 2006 5:03 PM To: Damien Dusha Cc: linux-dvb@xxxxxxxxxxx Subject: RE: Dvico Dual Digital Card... Problems getting USBWorking Damien, I have upgraded to 2.6.18-rc2 kernel, both the USB and PCI initialize proper. Yes I have downloaded the bluebird firmware. See below. The PCI part of the card came stright up with a 'modprobe cx88_dvb' using 2.6.18-rc2 kernel. Picture/tuning works fine with kaffeine. Any other version of the kernel/patches I tried all failed. Can you gie me the details of your firmware files or any other steps you did to get the USB to work. My firmware is as follows: 9025 Jan 10 2006 dvb-usb-bluebird-01.fw I have even tried a second PCI USB card as I thought it might not like the onboard ones. Sorry I can't help to much with the PCI card. What frontend registers when you load the PCI Drivers. One thing I ad was the drivers all saying it loaded proper but not able to tune either the PCI or the USB. This was with the sources from linuxtv.org? What revision is your card? Its on the back of hte card? Mines 1.4. Mark mythbox dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will try to load a firmware mythbox dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw' mythbox usbcore: registered new driver dvb_usb_cxusb mythbox usb 1-2: USB disconnect, address 2 mythbox dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. mythbox usb 1-2: new high speed USB device using ehci_hcd and address 3 mythbox usb 1-2: configuration #1 chosen from 1 choice mythbox dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state. mythbox dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. mythbox DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB). mythbox DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)... mythbox input: IR-receiver inside an USB DVB receiver as /class/input/input2 mythbox dvb-usb: schedule remote query interval to 150 msecs. mythbox dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected. Quoting Damien Dusha <damiendusha@xxxxxxxxxxxxxxx>: > Hi Mark, > > I am having the opposite problem - the PCI part is failing to tune. > > To ask the stupid question, have you downloaded the firmware? There is a > script in: > /path/to/kernel/sources/Documentation/Drviers/dvb/get_dvb_firmware bluebird > > I can tune the USB part, but not the PCI part. And for that matter, even > though tzap returns a good SNR for the USB part, I still cant get a picture, > which is really frustrating. > > If you can get a picture, let me know hat you did. > > I am having similar problems with FC5. > > Cheers > Damien. > > > > > > > -----Original Message----- > From: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] > On Behalf Of Mark > Sent: Saturday, 29 July 2006 12:11 PM > To: linux-dvb > Subject: Dvico Dual Digital Card... Problems getting USB Working > > Hi, > > I've spent the last few days trying to get a Dvico Dual Digital Card > running on my Gentoo > linux box for MythTV. > > The Card is a Rev 1.4 with the Zarlink ZL10353 Front end. > > Things I have tried: > > Gentoo Sources 2.6.16 Card was seen but no frontends attached. > Gentoo Sources 2.6.17 Card was seen but frontends attached but could > not scan channels on > either USB or PCI. > Vanilla Sources 2.6.18-rc2 Card seen frontends attached PCI Cards works > but USB card > always fails to Tune. > See the DMESG from 2.6.18-rc2 below. > > I have tried the card in Windows and it works fine. I have also tried > the v4l Mercurial > sources as well under all of the above kernels. With Mercurial Sources > from July 22 the > Card is seen both tuners initialize but neither will tune a station. > > Any pointers to getting the USB part of the card working would be > greatly appreciated. > > Thanks in advance. > > Mark > > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
