Re: Nova-T USB2 frontend not loading...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Can you try my repository: http://linuxtv.org/hg/~pb/v4l-dvb and the 
firmware 'dvb-usb-nova-t-usb2-02.fw' from here 
http://www.thadathil.net/dvb/fw/ 

Patrick.

--
  Mail: patrick.boettcher@xxxxxxx
  WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/

On Mon, 24 Jul 2006, Steve Pearce wrote:

> I wonder if anyone is able to help me to get the frontend for my WinTV
> Nova-T USB 2 DVB unit to load. I've tried on two freshly compiled kernels:
> 2.6.17.6 and 2.6.16.19, both with the relevant modules compiled (as far as
> I've been able to ascertain) and both with the same effect (excerpt from
> dmesg):
> 
> 	dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
> 	dvb-usb: will pass the complete MPEG2 transport stream to the
> software demuxer.
> 	DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2).
> 	dvb-usb: MAC address: 00:0d:fe:35:35:35
> -->	dvb-usb: no frontend was attached by 'Hauppauge WinTV-NOVA-T usb2'
> 	input: IR-receiver inside an USB DVB receiver as /class/input/input2
> 	dvb-usb: schedule remote query interval to 100 msecs.
> 	dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and
> connected.
> 	usbcore: registered new driver dvb_usb_nova_t_usb2
> 
> I believe all of the appropriate kernel modules are loaded (excerpt of
> lsmod):
> 	dvb_usb_nova_t_usb2     4932  0
> 	dvb_usb_dibusb_common     5828  1 dvb_usb_nova_t_usb2
> 	dib3000mc              15008  1 dvb_usb_dibusb_common
> 	dib3000_common          1888  1 dib3000mc
> 	dvb_usb                19976  2
> dvb_usb_nova_t_usb2,dvb_usb_dibusb_common
> 	dvb_core               72840  1 dvb_usb
> 	firmware_class          7616  2 isicom,dvb_usb
> 	i2c_core               16912  2 dib3000_common,dvb_usb
> 	dvb_pll                10116  2 dvb_usb_dibusb_common,dvb_usb
> 	uhci_hcd               20332  0
> 	usbcore               116320  5
> ehci_hcd,dvb_usb_nova_t_usb2,dvb_usb,uhci_hcd
> 
> lsusb reports the device as "ID 2040:9301 Hauppauge Hauppauge WinTV NOVA-T
> USB2 (warm)", but /dev/dvb/adaptor1 contains no frontend, just demux0, dvr0
> and net0. Equally suspicious is the fact that the device cannot be
> hot-plugged--it's only ever detected from a reboot.
> 
> I've even resorted to opening the thing up to check is it contains the DiB
> chip not some new variant, and it does seem to have the DiB3000P on the
> board.
> 
> Any suggestions would be most welcome!
> 
> Thanks in advance...
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
>  
> 
> 
> _______________________________________________
> 
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 


_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux