Hi Mark, I am having the opposite problem - the PCI part is failing to tune. To ask the stupid question, have you downloaded the firmware? There is a script in: /path/to/kernel/sources/Documentation/Drviers/dvb/get_dvb_firmware bluebird I can tune the USB part, but not the PCI part. And for that matter, even though tzap returns a good SNR for the USB part, I still cant get a picture, which is really frustrating. If you can get a picture, let me know hat you did. I am having similar problems with FC5. Cheers Damien. -----Original Message----- From: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] On Behalf Of Mark Sent: Saturday, 29 July 2006 12:11 PM To: linux-dvb Subject: Dvico Dual Digital Card... Problems getting USB Working Hi, I've spent the last few days trying to get a Dvico Dual Digital Card running on my Gentoo linux box for MythTV. The Card is a Rev 1.4 with the Zarlink ZL10353 Front end. Things I have tried: Gentoo Sources 2.6.16 Card was seen but no frontends attached. Gentoo Sources 2.6.17 Card was seen but frontends attached but could not scan channels on either USB or PCI. Vanilla Sources 2.6.18-rc2 Card seen frontends attached PCI Cards works but USB card always fails to Tune. See the DMESG from 2.6.18-rc2 below. I have tried the card in Windows and it works fine. I have also tried the v4l Mercurial sources as well under all of the above kernels. With Mercurial Sources from July 22 the Card is seen both tuners initialize but neither will tune a station. Any pointers to getting the USB part of the card working would be greatly appreciated. Thanks in advance. Mark ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
