Hi, following issue is also interesting... http://kurzlink.de/7vt3Sf8tH I haven't had such an issue here in Frankfurt or in Cologne, and I got a positive feedback from people in other german cities as well that the em28xx driver works with the correct 7MHz frequencies.. maybe it would be good to add following ones as well .. at least it wouldn't hurt: T 177000000 7MHz (same as in your new patch) # (!hack, was 177.5Mhz) BBC, FAB, WDR, SüdWest T 191000000 7MHz (same as in your new patch) # (!hack, was 191.5Mhz) MDR, NDR, arte On 7/25/06, Sergei Haller <sergei@xxxxxxxxxxxxxxxx> wrote:
On Tue, 25 Jul 2006, Markus Rechberger (MR) wrote: MR> Hi, MR> MR> this frequency file is wrong... MR> MR> +T 177500000 8MHz 3/4 NONE QAM16 8k 1/8 NONE # 5 BBC World, FAB, WDR, MR> SWR MR> +T 191500000 8MHz 2/3 NONE QAM16 8k 1/8 NONE # 7 MDR, NDR, arte, K07 MR> MR> both channels run witz 7MHz (which is important for several drivers) in fact, the reception is better with 7MHz. This isn't mentioned on the http://www.garv.de pages. :( BTW, I also filled in the fec_low values as autodetected by dvbscan (auto for zdf). and replaced QAM16 by QPSK on the dvb-h transponder. attached new patch. The only transponder I can't receive here is now zdf. Signed-off-by: Sergei Haller <sergei@xxxxxxxxxxxxxxxx> _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
-- Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
