On Tuesday 18 July 2006 12:41, Rudy Zijlstra wrote: > Rudy Zijlstra wrote: > > Andrew de Quincey wrote: > >> On Monday 17 July 2006 16:06, Rudy Zijlstra wrote: > >>> Hello, > >>> > >>> I am getting the following messages from a previously working card: > >>> > >>> Kernel 2.6.17.4, same results with 2.6.16.16, although 17 gives > >>> slichtly > >>> more verbal output > >>> > >>> saa7146: register extension 'budget_av'. > >>> ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20 > >>> saa7146: found saa7146 @ mem e3964000 (revision 1, irq 20) > >>> (0x153b,0x1156). > >>> saa7146 (0): dma buffer size 192512 > >>> DVB: registering new adapter (Terratec Cinergy 1200 DVB-C). > >>> adapter failed MAC signature check > >>> encoded MAC from EEPROM was > >>> ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff > >>> KNC1-0: MAC addr = 00:0a:ac:01:b7:ed > >>> DVB: TDA10021: tda10021_readreg: readreg error (ret == -121) > >>> budget-av: A frontend driver was not found for device 1131/7146 > >>> subsystem 153b/1156 > >>> budget-av: ci interface initialised. > >>> > >>> Any ideas on what to do to get it working again? Looking at this, it > >>> seems as if eeprom has lost its values. > >> > >> Try this patch: > >> http://linuxtv.org/~mkrufky/stable/2.6.17.y/budget-av-frontend-fix.patch > >> > >> Should be in mainline sometime soon.... > > > > Thanks, that solved it! I was getting afraid i had to ditch that card... > > > > Rudy > > There is a bug in dvbstream which takes care it does not tune on DVB-C. > So far have not found it. > On dvb-core there is the dvb_shutdown_timeout parameter, but on budget > card this module is not used, see below my lsmod list: > > Module Size Used by > snd_seq_oss 32640 0 > snd_seq_midi_event 6912 1 snd_seq_oss > snd_seq 50512 4 snd_seq_oss,snd_seq_midi_event > snd_pcm_oss 40736 0 > snd_mixer_oss 18048 1 snd_pcm_oss > snd_usb_audio 74976 0 > snd_usb_lib 15488 1 snd_usb_audio > snd_rawmidi 21152 1 snd_usb_lib > snd_seq_device 7436 3 snd_seq_oss,snd_seq,snd_rawmidi > snd_hwdep 8068 1 snd_usb_audio > ohci_hcd 20100 0 > i2c_i810 5764 0 > i2c_algo_bit 9480 1 i2c_i810 > i2c_i801 8844 0 > budget_av 17536 0 > saa7146_vv 47104 1 budget_av > video_buf 20996 1 saa7146_vv > budget_core 9220 1 budget_av > saa7146 15624 3 budget_av,saa7146_vv,budget_core > ttpci_eeprom 3200 1 budget_core > stv0299 11144 1 budget_av > tda10021 6916 1 budget_av > tda1004x 16644 1 budget_av > > How can i set the dvb_shutdown_timeout parameter on the budget card, so > i can work around the dvbstream bug that i cannot yet find? I think you have compiled dvb-core into your kernel. If you change it to a module, that parameter should start working. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
