Nexus-s + Aston 1.05 CAM insert/remove not detected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have tried to find, as good as i am, to find the solution, if possible,
to my problem.

Problem:
The dvb-ttpci driver does not detect the insertion or removal of the cam
card.

I have the following setup:

nexus-s rev 2.1 (pci)
CI module (3,5" directly connected to nexus-s.
Aston ver 1.05 CAM (+ CanalDigitaal sim card)

Linux FC5 latest kernel.
vdr (version 1.4.1)
kaffeine (0.8.2-beta1)

The drivers load without problem. I can see free to air channels. When I
switch to any of the encrypted channels black screen.

I have tested a lot and put the driver in debug mode (255). No signs.
Looking through the av7110 driver part I see that there is a part for
catching the irq when the cam is inserted or removed but this is never
called as far as I can see.

Is the problem my CAM card (Aston ver 1.05)?
Is the problem the setup?
Any solution to this problem?

I'm asking because after searching the net for two days I did not find any
real answer about this combination not working or working.
Some people report problems with the 1.05 Aston CAM but not solutions.

I have tested the same setup in the same machine with windows XP and the
hauppauge software. This is working with some problems where the cam is
not detected right away but after removing and inserting it is found and
working.

dmesg output:
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 177
saa7146: found saa7146 @ mem e094e000 (revision 1, irq 177) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:22:5b:e1
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app
80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 0
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi4 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input6
dvb-ttpci: found av7110-0.


_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux