Actually I think my message was lost between some others:
Anyone an idea how to fix this the problem with the message:
dvb-usb: recv bulk message failed: -110
while trying to scan for channels ?
Thanks,
Christof
Christof wrote:
Hi,
It was a fresh pull from yesterday. (so a mix up was not possible)
Maybe I did not explain so clearly, let me rephrase:
As I wrote first, yesterday I tried to pull from
http://linuxtv.org/hg/v4l-dvb, which resulted in the error -110 when
trying to scan for channels (using kaffeine):
dvb-usb: WideView WT-220U PenType Receiver (based on ZL353)
successfully initialized and connected.
dvb-usb: recv bulk message failed: -110
Then I tried to pull from http://linuxtv.org/hg/~pb/v4l-dvb (because you
asked so in the mail of march 28) but this resulted in the compilation
errors. I mentioned in my previous mail.
regards,
Christof
On Mon, 10 Jul 2006 09:12:50 +0200 (CEST), "Patrick Boettcher"
<patrick.boettcher@xxxxxxx> said:
Hi,
On Sun, 9 Jul 2006, Christof wrote:
Today, I have the same problem as Mikel Martin (but for him that was in
March). The error happens when I try to scan for channels and is not
resulting in any channels.
Are the required changes supposed to be already in
http://linuxtv.org/hg/v4l-dvb ? If so, I still have the same problem, so
I tried to pull from the location you gave below (to try to solve the
problem), but compilation fails:
CC [M] /usr/src/v4l-dvb/v4l/dvb-ttusb-budget.o
LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop.o
LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop-pci.o
LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop-usb.o
CC [M] /usr/src/v4l-dvb/v4l/bt878.o
CC [M] /usr/src/v4l-dvb/v4l/dvb-bt8xx.o
CC [M] /usr/src/v4l-dvb/v4l/dst.o
CC [M] /usr/src/v4l-dvb/v4l/dst_ca.o
CC [M] /usr/src/v4l-dvb/v4l/cinergyT2.o
/usr/src/v4l-dvb/v4l/cinergyT2.c:157: error:
'CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT' undeclared here (not in a function)
/usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_submit_stream_urb':
/usr/src/v4l-dvb/v4l/cinergyT2.c:269: error:
'CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE' undeclared (first use in this
function)
[..]
Very strange. Are you using a up-to-date v4l-dvb checkout? If you were
using an old one and you just updated try make distclean and run make
again.
regards,
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
