Hi Patrick, Today, I have the same problem as Mikel Martin (but for him that was in March). The error happens when I try to scan for channels and is not resulting in any channels. Are the required changes supposed to be already in http://linuxtv.org/hg/v4l-dvb ? If so, I still have the same problem, so I tried to pull from the location you gave below (to try to solve the problem), but compilation fails: CC [M] /usr/src/v4l-dvb/v4l/dvb-ttusb-budget.o LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop.o LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop-pci.o LD [M] /usr/src/v4l-dvb/v4l/b2c2-flexcop-usb.o CC [M] /usr/src/v4l-dvb/v4l/bt878.o CC [M] /usr/src/v4l-dvb/v4l/dvb-bt8xx.o CC [M] /usr/src/v4l-dvb/v4l/dst.o CC [M] /usr/src/v4l-dvb/v4l/dst_ca.o CC [M] /usr/src/v4l-dvb/v4l/cinergyT2.o /usr/src/v4l-dvb/v4l/cinergyT2.c:157: error: 'CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT' undeclared here (not in a function) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_submit_stream_urb': /usr/src/v4l-dvb/v4l/cinergyT2.c:269: error: 'CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE' undeclared (first use in this function) /usr/src/v4l-dvb/v4l/cinergyT2.c:269: error: (Each undeclared identifier is reported only once /usr/src/v4l-dvb/v4l/cinergyT2.c:269: error: for each function it appears in.) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_free_stream_urbs': /usr/src/v4l-dvb/v4l/cinergyT2.c:299: error: 'CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE' undeclared (first use in this function) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_alloc_stream_urbs': /usr/src/v4l-dvb/v4l/cinergyT2.c:307: error: 'CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE' undeclared (first use in this function) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_mmap': /usr/src/v4l-dvb/v4l/cinergyT2.c:706: error: 'CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE' undeclared (first use in this function) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_query_rc': /usr/src/v4l-dvb/v4l/cinergyT2.c:806: error: 'CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL' undeclared (first use in this function) /usr/src/v4l-dvb/v4l/cinergyT2.c: In function 'cinergyt2_query': /usr/src/v4l-dvb/v4l/cinergyT2.c:890: error: 'CONFIG_DVB_CINERGYT2_QUERY_INTERVAL' undeclared (first use in this function) make[3]: *** [/usr/src/v4l-dvb/v4l/cinergyT2.o] Error 1 make[2]: *** [_module_/usr/src/v4l-dvb/v4l] Error 2 make[2]: Leaving directory `/usr/src/linux-2.6.16.13-4' make[1]: *** [default] Error 2 make[1]: Leaving directory `/usr/src/v4l-dvb/v4l' make: *** [all] Error 2 I suppose this is a non stable development branch ? So what can I do to try to get things working ? Thanks, Christof On /Tue Mar 28 21:18:31 CEST 2006/ Patrick Boettcher wrote: ---------- Hi Mauro, can you please pull from http://linuxtv.org/hg/~pb/v4l-dvb <http://linuxtv.org/hg/%7Epb/v4l-dvb> for support of a new revision of a DVB-T USB stick made by WideView. Thanks, Patrick. -- Mail: patrick.boettcher at desy.de <http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ <http://www.wi-bw.tfh-wildau.de/%7Epboettch/> On Tue, 28 Mar 2006, Mikel Martin wrote: >/ Much, much better now!!!!! />/ />/ usb 1-2: new high speed USB device using ehci_hcd and address 2 />/ dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in />/ cold state, will try to load a firmware />/ dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' />/ usb 1-2: USB disconnect, address 2 />/ dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. />/ usb 1-2: new high speed USB device using ehci_hcd and address 3 />/ dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in />/ warm state. />/ dvb-usb: will use the device's hardware PID filter (table count: 15). />/ DVB: registering new adapter (WideView WT-220U PenType Receiver (based on />/ ZL353)). />/ DVB: registering frontend 0 (WideView USB DVB-T)... />/ dvb-usb: schedule remote query interval to 300 msecs. />/ dvb-usb: WideView WT-220U PenType Receiver (based on ZL353) successfully />/ initialized and connected. />/ dvb-usb: recv bulk message failed: -110 />/ />/ Dont't know what the last message stands for, but it now scans for channels. />/ I'm not getting any channel but may be the problem is with the antenna, I'll />/ keep on trying I'll let you know when everithing works Ok. />/ />/ Thank you very much, again , Patrick. />/ />/ Could you tell me where did you get the firmware form?, is it possible to />/ obtain it from the logs I posted?, any docs telling how to do it? />/ />/ Regards, />/ />/ Mikel Martin/ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
