G'day all, I'm having trouble with the dvico dual dvb-t card in the initialisation of it. Sometimes, both tuners work. Othertimes, only one tuner or neither work. When neither is detected, it will still say that it has registered a frontend. I have the latest v4l sources, running kernel 2.6.17.2. In another post I read about disconnecting power but even that doesn't garentee me success. Below is a sample of dmesg when neither device work. cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 201 CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [ card=44,insmod option] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xd0000000 cx88[0]/0: found at 0000:01:01.0, rev: 5, irq: 201, latency: 32, mmio: 0xdc00000 0 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0cx2388x dvb driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:01:01.2[A] -> GSI 21 (level, low) -> IRQ 201 cx88[0]/2: found at 0000:01:01.2, rev: 5, irq: 201, latency: 32, mmio: 0xdd00000 0 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... usb 4-6: new high speed USB device using ehci_hcd and address 3 usb 4-6: configuration #1 chosen from 1 choice cx2388x blackbird driver version 0.0.6 loaded Thanks in advance, Brett _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
