'afternoon all, I while back, you were helpful enough to lend a hand with using a DVICO Dual Digital card on Linux, for my MythTV setup... You wrote: > I've worked on the Dual Digital card. One of the tuners is USB 2.0 (you > hook it up to a USB port with an external cable) and the other is PCI. > Provided you have a spare USB2 port, things work fine. (I do pretty much > all of my MythTV recordings through one of these now.) > http://www.fusionhdtv.co.kr/ENG/Products/DualDigital.aspx Work got busy, and I had to let more fun things slip, but I'm back to it now, although not successfully. If you have a tick, can you please point out where my mistake might lie. I have followed the wiki instructions to get the latest source via mercurial, but the build has failed miserably. I'm running on Suse 10: funbox:/home/tim/Software/v4l-dvb # uname -a Linux funbox 2.6.13-15.8-default #1 Tue Feb 7 11:07:24 UTC 2006 x86_64 x86_64 x86_64 GNU/Linux So I reinstalled the kernel source (just to be sure) and ran 'make cloneconfig' and 'make modules_prepare'. But 'make all' in the v4l-dvb dir throws up lots of 'required kernel opt not present' errors, followed by: make -C /lib/modules/2.6.13-15.8-default/build SUBDIRS=/home/andrea/Software/v4l-dvb/v4l modules make[2]: Entering directory `/usr/src/linux-2.6.13-15.8-obj/x86_64/default' make[2]: *** No rule to make target `modules'. Stop. I'm totally confusified!! :-) Any ideas on which way I might turn? Thanks, Tim. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
