dvb@xxxxxxx wrote:
> do i need to use the latest mercurial version?
> or is the support in 2.6.17.1 adequate for this card?
>
> if i do need the latest version, can it be used in a monolithic kernel?
> if so, how? the instructions only seem to refer to building modules.
>
> would overwriting the kernel sources with the latest v4l-dvb work?
>
> if it must be built as modules, do i have do disable dvb/cx88 support
> in the kernel source tree before configuring/compiling the latest v4l-dvb?
i tried this approach and usb tuner is now detected. hal says:
CX23880/1/2/3 PCI Video and Audio Decoder (cap=unknown, driver=cx8800)
Video Device /dev/video1 (cap=video4linux)
Video Device /dev/vbi1 (cap=video4linux)
CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (cap=unknown)
Bluebird
DVB Device /dev/dvb/adapter0/net0 (cap=dvb)
DVB Device /dev/dvb/adapter0/frontend0 (cap=dvb)
DVB Device /dev/dvb/adapter0/dvr0 (cap=dvb)
DVB Device /dev/dvb/adapter0/demux0 (cap=dvb)
USB Vendor Specific Interface (cap=unknown, driver=dvb_usb_cxusb)
the /dev/dvb entries in the bluebird section above is all i
have in /dev/dvb. so where's the pci tuner?
what should i be expecting to see?
the bad news is that even though i run "make xconfig" in
the v4l-dvb drectory to only compile what i thought i
needed, it went and compiled and installed all the modules
it could. how do i tell it to only make and install what was
configured?
> also, does anyone know exactly what kernel config parameters are needed
> to support this card? i don't want to build every module.
> the ones i think i need are:
>
> HOTPLUG
> I2C_??? (depends on hardware)
> VIDEO_DEV
> VIDEO_V4L1[_COMPAT]
> VIDEO_CX88
> VIDEO_CX88_ALSA
> VIDEO_CX88_DVB
> VIDEO_CX88_DVB_MT352
> DVB
> DVB_CORE
> DVB_USB
> DVB_USB_CXUSB
> DVB_CX22702
> DVB_MT352
>
> many thanks for any help.
>
> cheers,
> raf
>
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
