Tried to load the dvb-usb-wt220u-02.fw but the behaviour is similar :-( usb 3-4: new high speed USB device using ehci_hcd and address 3 usb 3-4: new device found, idVendor=14aa, idProduct=0225 usb 3-4: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-4: configuration #1 chosen from 1 choice dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-wt220u-02.fw' This in not the appropriate firmware, I guess. The article number is: 25451-rev.3 and the windows install description claims this is a "DVB-T & ANALOG TV HYBRID" USB stick. Any idea which firmware I could try? Thanks, best regards, Erich On Friday 30 June 2006 16:11, Erich Focht wrote: > Hi, > > I bought a Freecom DVB-T stick because I knew it was supported by Linux. And > now it turns out that it has a new, unsupported ID. > > Tried adding the ID to dvb-usb-ids.h, so when inserting the SUB stick it now > loads the dvb-usb-wt220u-zl10353-01.fw firmware, the LED blinks two times and > stays dark. The product ID doesn't change, so the stick is probably not in > warm state, yet. > > Help! What can I do? Is this the wrong firmware? > > Thanks for any hints... > > Best regards, > Erich > > _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
