Hi, On Thu, 29 Jun 2006, Klaus Frahm wrote: > > This and > > > > > I have an AverTV A800 USB box which does only connect in the cold state > > > (with an unpatched driver). I have mentioned this a few days ago in this > > > post: > > > http://www.linuxtv.org/pipermail/linux-dvb/2006-June/011072.html > > > and this makes me wonder, if maybe no firmware is needed for the last > > generation of devices. > > > Can you provide a lsusb -v for your device which is not reenumerating > > without loading a driver (and firmware), please? > > Thank you very much for answering (and also your work on these drivers > and the informations on your webpage!). I have appended below the output > of "lsusb -v". I have obtained this output using the patched module > dvb_usb_a800 (please tell if you need the output of "lusb -v" with > the unpatched module) using this patch: Actually I meant doing that _without_ any driver loaded and a clean plug. So unload all driver, tell hotplug not to load it, plug the device, do lsusb (make sure that no firmware is loaded and no driver is doing anything on the board). regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
